T.you
Type: Posts; User: DINGO
Thanks for your reply mate.
Yes, is all as you write, but all sensores are ok, and if i have
a paper empty sensor, i thynk that the copier must jam when the paper finish, and is not the sympton....
Hi I have some AR-M451N with a issue that i can t fix.
The simpton is when the copier as paper size A5R , in the drawers, allawys when the paper finish, the copier not show the message add paper,...
Thank you my friend.
B.regards
Hi friends
I have a doubt that is if the copiers mx 5000, 4100, 2600 and so, when do not have a option right exit tray, do not print in A3 W paper size?
Is right, or i m miss something?
I have...
Many thanks, friends
Many thanks friends.
I m lookyng something for set like, paper 70 grs to 90grs or 90 grs to110grs, is something like this, but i cant found it.
Hi friends
I know that is possible change the print temp, and paper weight work, in the mx 5000 web page definitions, i already took a look, but do not found.
Someone knows where is it?
many...
thanks mate, i know that , but in my case is not the issue.
t.you.
About 150k eachs.
Thanks
Hi friends
I m around two mx5000n that the prtints/ copys , not fuse the toner, in some parts of the paper.
The fusers units seems ok, and the paper is good to.
Can someone give some help?
...
Hi
OEM piker fingers, OEM fusers rollers, and a good densyti toner in developer helps in this issue.
G.luck
hi mate
One thing, when you replace the dv unit, you use a new developer or use the same developer?
if you use d the same, may be have something in the developer that you can´t see.
good luck
thank you to Down Under
thank you mate, but i already test with another mfp and main board to
thanks anyway
Hi friends
I need your help, if someone already saw a issue like this:
I havę a ar_m350n that is giving me two errors, H2_00 and f2-39.
Of corse i already chek the termistor, test with another...
Hi
Sometimes hapened, i already saw a few times This.
And, as you said, unpluged the costumer network, and lluged at your laptop , works fine, so something is wrong in the network, may be first...
Hi
Your, toners/drums are a original parts sharp?
I pay the work of corse.
Hi
I need the two boot flash roms for a sharp model AR-M451 U VERSION with AR-NC7, and the Room version is AR-P20/AR-NC7, i need the BOOT and the MAIN.
Or i can...
Hi
I need the two boot flash roms for a sharp model AR-M451 U VERSION with AR-NC7, and the Room version is AR-P20/AR-NC7, i need the BOOT and the MAIN.
Or i can sent two flash if someone can...
Hi
I m looking for someone, or information where, of preference around my country, for sent by post, payng of corse, that can make a copy of the two boot flashs MAIN and BOOT, of a copier...
-fix
-reseat all conetions in the PCU board.
:)thanks
Hi friends
I have a mx 2700 that take a long long time in a wuarm up.
Any help, thanks in advance.(already try change the fuser unit, not fix)
regards