Search:

New Dev. assy solved the problem. Thanks for everyone involved in this.

I think I will order new Dev. assy as well as new toner. Will keep you guys posted about the outcome. I don't see any other option.

For someone who asked about primary charging, it's installed...

34316

I just cleaned laser unit, it's the same. It wasn't dirty at all, both prism and mirrors.

I'm left with either developing assy or drum/blade. Considering machine is almost new, I doubt drum...

After cleaning contacts on Developer Assy, it's not so washed out anymore. Still it has this bands of darker areas also randomly generated but visible on one side mostly. Happens on both print and...

anyone ?

Hi,

I have randomly positioned white stripes over long edge of paper (position and size are each time different, sometimes even whole A4 paper is washed out). Looks like there is voltage leak...

Definitely not paper problem, machine was tested for paper.

Need help with one Canon iR2520 machine. This problem is recurring several times as well. One side is always (a lot) brighter then the other. First toner was replaced with original Canon toner,...

Anyone tried installing 3rd party network adapter successfully ?

Has anyone else tried to put 3rd-party network adapter instead of original one in Fiery X12 and can it be recognized or driver has to be installed manually ? Is it even possible ?

Thanks in...

You should format HDD by 08 + 690 (2). If you cannot go into 08 it can be HDD is faulty. In that case you need to replace HDD, reload firmware for HDD and do firmware initialize by 08+947 and then...

After replacement of CUI interface PWB and reloading of software, machine started but Machine Info and Job Info buttons do not work. Now according to Parts List I ordered 960K41444 but I received...

Yes, I thought it might be the problem. I tried another complete scanner, but apparently CCD PWB on that one was faulty too.

I ordered a new scanner and waiting for it. Thanks for everyones help.

Tried it, no visible changes whatsoever. However, its problem with scanner, the one I tried was also faulty as well.

Got urgent problem with one M35. Copy from platen glass is fine, but from ADF is dark (black background). I have cleaned optics, changed complete scanner as well as Image Processor PWB, problem...

Thanks for everyones input, machine is actually returned to customer with old M and Y drums, but now I know what to do when I go to the machine again.

Thanks a lot !

First of all tnx for quick responses.

You were right it was Y and M cartridges problem as when I returned old cartridges, no code was present.

I will try shaking the cartridges and try to fix...

Hello,

I have code E020-0060 on Canon iR2020C even after change of the drums (all 4) and transfer belt. Sometimes it even gives E020-1060 code. Any help is appreciated.

Need help with setting SMB scanning on Xerox c2128. Made a shared folder on C:\scan with full permissions, then thru web interface have set up file repository with ip address of computer, name of...

Hi,

After trying to reload software to C2128 machine, something apparently went wrong as UI cannot boot and it constantly resets. Machine was upgraded using diagnostics navigator, after which it...

I got problem with image. Hard to explain for me so I posted a link to sample pic.

Especially is seen on photos, everything else (half tones, full tones) looks ok. Changed drivers, RIPs, cables....

Hi everyone,

I have problem with one iR2200 and need to replace the HDD and reload the sofware. Can anyone send me system software for iR2200 or tell me where to find it ?

It would be...

Hi,
I`m in a great need of reloading the software onto HDD as it has been replaced. I have PWS (diagnostic tools including Alt boot), but I don`t have system software, as well as USB drivers as the...

No, I can`t see it, it says 'Network controller is down' or something like that and dont have protocol settings visible.

I got pws, can u tell me what special software is it I need besides pws,...