Search:

Type: Posts; User: tinnyjay

Page 1 of 20 1 2 3 4

Search: Search took 0.19 seconds.

  1. Replies
    9
    Views
    615

    Re: IR ADV C7280 with E04-502/Solved

    SOLVED


    Fixing drawer switch under duplex was faulty. Nonsens at all, but that was the prob.
    Thank you guys
  2. Replies
    9
    Views
    615

    Re: IR ADV C7280 with E04-502

    Different ones. Depend on what paper or size i am using.
    Also it happens when the machine is idle, i open and close fixing unit.
  3. Replies
    9
    Views
    615

    Re: IR ADV C7280 with E04-502

    Changed fuser unit and interior fixing connector with cables also.
  4. Replies
    9
    Views
    615

    Re: IR ADV C7280 with E04-502

    Changed with new ones
  5. Replies
    9
    Views
    615

    Re: IR ADV C7280 with E04-502

    Not my case.
    I have changed both fuser connector and body/interior connector but still the same.
    The problem looks deeper. Could be a faulty Relay PCB but i am not sure.
    Thanks anyway
  6. Replies
    9
    Views
    615

    IR ADV C7280 with E04-502

    Hi guys,
    I have an Ir Adv c7280 (same as c7260) and it gives E04-502.
    Changed fuser unit, change fuser drawer and drawer into the machine but when i have to open fuser drawer bcs a misfeed, it...
  7. Thread: E000005-001

    by tinnyjay
    Replies
    31
    Views
    21,495

    [Error Code] Re: E000005-001

    You have to check if the web solenoid is working. Sometimes it causes this issue.
    Also i would suggest to put a piece of paper in sensor with machine turned off. Turn it on and whait for for e-05...
  8. Replies
    2
    Views
    3,576

    Canon Ir Ad 8505 E302-003

    Hi guys,
    When i scan color documents from the glass (also from adf) I face E302-003.
    Cleaned glass, scanner, led etc, but still the same.
    Anyone had a related problem before please?
    Regards.
  9. Replies
    12
    Views
    8,137

    [Error Code] Re: E302-001 Canon Image Runner Advance 6075

    Clean the glass strip inside adf scanner.
  10. Replies
    10
    Views
    5,267

    Re: Canon IR Adv 8105 E808-03/08

    The plastic over fusing unit.
  11. Replies
    10
    Views
    5,267

    Re: Canon IR Adv 8105 E808-03/08

    _________________________________

    Case closed.
    The cooling plastic above the fuser unit (also under Fuser IH), was broken and the heat caused E808-8.
    Thank you so much all of you.
    Regards,
  12. Replies
    10
    Views
    5,267

    Re: Canon IR Adv 8105 E808-03/08

    I changed PCB10
  13. Replies
    10
    Views
    5,267

    Re: Canon IR Adv 8105 E808-03/08

    The temperature of FIX UE and FIX UE2 is higher than FIX U by 5-6 degrees during printing.
    After 1 minute in this state the error comes up.
    Can it be heater or side thermistors?
    In any rare case...
  14. Replies
    10
    Views
    5,267

    Re: Canon IR Adv 8105 E808-03/08

    I did what you said but e808-08 comes time after time again.
  15. Replies
    10
    Views
    5,267

    Re: Canon IR Adv 8105 E808-03/08

    Hi,
    I changed AC Driver PCB Assy (FM4-1088) and IH POWER SUPPLY PCB ASS'Y (FM4-1092) and still the same.
  16. Replies
    10
    Views
    5,267

    Canon IR Adv 8105 E808-03/08

    Hi,
    I am facing a problem with ir adv 8105. I have changed thermistors and rollers, but e808-03 and e808-08 come time after time.
    Error 808-03 is FM7 because of clogging but 808-08 cant find it....
  17. Replies
    4
    Views
    1,240

    Re: Imagepress 1110 new fuser problem.

    Barings and rollers are new one and it starts creasing the paper after about 70 copies.
  18. Replies
    4
    Views
    1,240

    Imagepress 1110 new fuser problem.

    Hi guys,
    i had to change both fuser rollers (imagepress 1110) and since then the larger formats like A3/12x18 got wrinkled in the middle of the paper in horizontal direction.
    Tried all the ways...
  19. [Electrical] Re: Upper fuser roller problem in canon IR advance 8205.

    I would not suggest. Its the 8105 & 8205 can't use non-oem upper fuser roller and the reason is the temperature that goes higher and higher till you'll face E004 after 3-5 mins of printing.
    The...
  20. Replies
    3
    Views
    626

    Re: Canon IR Adv 8105 quality problem.

    I didnt tried a different fuser.
    All other parts change periodically (related to quality i mean)

    I have adjusted the machine but there is no difference on all my attepts.
  21. Re: Ir adv 8105 two sided paper jam only for A4 size paper

    Clean/change duplex registration sensor and motor in the duplex.
    Its a delay to PS65.
    If had to be reverse roller on the entrance of duplex, the jam code would be PS66 (delay).
  22. Re: Ir avd 8285 print and fotocopy quality problems.

    Clean the laser.
  23. Replies
    3
    Views
    626

    Canon IR Adv 8105 quality problem.

    Hi,
    i am facing this problem (the picture) and i have changed transfer belt and registration roller. Tried on two different drums, but still the same problem. Also tried to increase and decrease the...
  24. Replies
    3
    Views
    2,430

    Re: Iradv c5051 jam code 0010

    You have a small paper stucked there. Remove all plastics one by one and you will find it. Or could be a small plastic deviance somewhere.
  25. Re: Ir adv 8285 print out was very light but photocopy is normal density.

    If its very light mostly on photos and if printings got light without changing anything, (options, drivers) i would suggest to reset the printer.
    Preferences-Function Settings-Printer-Utility-Reset...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4