Search:

You may want to read this thread & more importantly the documents attached to it.

Epic Office Solutions sues Epson for $20M

I've talked to a couple buddies who used Betterteam. They are not very expensive at all & 2 dealers I know found decent people thru them. They post to other large job sites. When posting the job,...

Have you tried ACM? ACM Technologies, Inc.: Home

Yes the door opening & closing door issue could happen with any color toner. K, C, M, Y. Worth trying that before you go any further. You can even try to talk and end user thru the process over the...

When Konica Minolta had the toner factory fire and was on Back Order with many different supplies during Covid, to fill in they started buying toner ctgs from alternate factories/suppliers. Konica...

I never am a fan of the constant moving videos on home pages. Maybe that's just me. The motion on this one is faster than many too, making you get dizzy even quicker than others with motion/video....

Best of luck Billy C.
Yes used machs are more profitable but the smaller A4's can be hard to find in the used market. A4's are Kyocera's & Impressions Solutions strong point. The no quota aspect of...

You could get the Copystar machs thru 1 of their wholesale distributors, such as: Impressions Solutions in Columbus Miss or OES Solutions in Westfield Indiana. Those are 2 that have very good...

I have a few friends who have used Send a Job to 100+ Job Boards Free with 1-Click successfully. Supposedly they got a few good technician candidates & the site is not overpriced for a 3 month...

I think the Non OEM Toner message does not get saved into the machines memory until the ctg runs empty. So if you can get a new OEM or good chipped toner in the machine before the ctg runs out, the...

I don't think Lexmark markets or sells either of these models. (Muratec sells the C258 but not the C658)

I stopped years ago. Didn't use any patches or gum but did use a lot of tooth picks and or plastic drink stirrers. Seemed to help a lot with keeping my hands & mouth busy. Putting them in my mouth &...

Read this thread, it may help:

Kyocera Ecosys M2540dw - skew

Different model, same issue possibly.

Try this website, I have a few friends who have used them & all went fine:

RECHARGERSTORE

Just looked it up & that Oce machine is made by Muratec, same as Muratec MFX-2030. Maybe you know a friendly dealer who sells Muratec? But not sure if it would be keyed or chipped differently....

With Panasonic pretty much being out of the MFP business at this point, I wouldn't imagine they are spending anytime developing new drivers or firmware upgrades for that matter. It's like looking for...

They won't show it on their website but they wholesale parts for many low to mid range Toshibas.

If you don't get any Auth Dlrs to reply with a yes, try ACM Technologies. They should wholesale it to you I think. www.acmtech.com

Just Manuals pays for his advertising on this site & has helped out many with his service manuals. Even at times at No Charge.

This is back when Kyocera was making 2 different toners, 1 for Copystar machs & 1 for Kyocera Mita's. The gears were different but i can't remember how so. They fit in the mach but they are not...

Ditto. I crossed it to a Sharp MX2300N.

Take a real close look at the chip on it & see if there are any markings on the chip itself. May give you a clue as to the model it goes into.

Panasonic now sells all their prods for their older copiers thru 3 distributors:
Parrot Dist in Tenn Parrot Distributing, Inc.
New Wave Tech in MD http://www.newwavetech.com/
Nu World in...

Intro Date Jan 2006.

Kyocera did acknowledge that the rubber bladder seal can come loose at times & toner will just keep flowing out of it without triggering the recep full mssg. They said something about blowing into...