Search:

Shoot it with a bazooka before you go bancrupt, :cool: maybe you have a problem with the accordeon sensor in the fuser or paper dust in the registration. Good luck.

Sometimes it helps to change the "print pcessor" in the printerdriver "advanced" once i added the LPD-Monitor and made a lpr-port that speeded up everything.

This is a Pro 907/1107/1357 and grey band on the backside of copy´s / Prints without running duplex job indicates a cleaning problem in transfer belt unit. This means remove dissassemble clean and...

Can you connect with a crossover cable without a router ?, try set your computer to IP 192.168.1.1 SUB 255.255.255.0 and the copier to IP 192.168.1.2 SUB 255.255.255.0 GW 127.0.0.1 if this work's...

I think you have 3 problem's 1. Cyan developer 2.Pressure roller 3.PTB Clutch.I would replace Cyan dev.(firefly spots) replace fusing pressure roller (blurry image at the center of the trailing part...

Buy new disks from Ricoh, according to my own experience,replacement disk's baught on the market doesn't work.Because when you install a ricoh disk on a computer you will discover the fact that the...

The PM interval for color dev is 150K.Determine how many prints the color dev. have on the counter, if more than 150' replace the dev all 3 if color(The only dev.you can replace single is...

Did you clean the "Doctor gap" ,filming on the" Doctor blade " is very common just as "toner supply clutch assy" the first step is replace the "toner supply Clutch assy" it's
almost a PM Part
A

No it's the one close to the center of the OPC approximately at the direction 16:00 "on a watch" it's screwed in the faceplate of the OPC unit
Yours
Anders

I'ts the unit "A" and you release the screw ,squeeze the lever (the brownish thing) and pull the unit out, loosen the top cover (4 srew's) if i remember correct.Then empty the container in a plastic...

in the cleaning unit (in the container behind the cleaning blade)

Hello i had a problem similar to your's and it turned out to be bad HDD's they are connected as an "assy" with to disks and depending on what file i was printing/copying it Froze in Copying,i tried...

My experience is this.The employers in sweden have to follow a lot of environmental regulations and quality certifications ISO 9000 and ISO14000 and so on and my own thougt's on this matter is mostly...

Sometimes a "saying" tell's it all "Talking is silver silence is gold" or "it's better to be quiet and let everybody think you are an idiot rather than open your mouth and remove any dougth's", but...

I agree with all the other and would replace the PSU

Do you want to scan to mail or use it as a twain scanner? if you want a twain scanner you need the driver for this.If you want scan to mail you need scanrouter.Either way you need to know if you have...

This happen's some time's when the developer goes bad, remove the toner cartridge (turn so it can't feed toner) replace the developer and initiate developer "without" toner cartridge (otherwise it...

This i will read carefully and take note's about good info
Thank's

Only one problem about this Bulletin,the patch was already installed together with all the other available patch'es.However the problem is solved and the solution was the "ppd" in combination with...

Ricoh USA - Support Center
this is alink that should work for is300e if it's a scannerdriver for IS300e you are looking för.
best regards
Anders

I had a similar problem on a Afc 3260 it turned out to be Power Supply Unit a missing voltage was the actual reason
A

Now i tried the Win PPD at customer site and it worked very well now they can do booklet with saddle staple in indesign (heavy document's) without worrying about Postscript errors ,a little higher...

Hi all, this problem wasn't networkspeedrelated but today i downloaded the Win PPD for pagemaker and installed a new printer in MacOSX using this PPD and the result was that suddenly every option in...

I'll try to do so at monday when i patch up the RIP to the appropriate version but personally i'm doughtful about the networkspeed,i believe that there would be other problems also if it was the...

To me it must be Ricoh Aficio color 2003 without any hesitation