These Machines are pretty Solid, disconnect the HDD and reboot it, if it comes into ready mode, you have a bad drive, just replace it.
Type: Posts; User: Julio119
These Machines are pretty Solid, disconnect the HDD and reboot it, if it comes into ready mode, you have a bad drive, just replace it.
Hi! Mikon88, did you get this resolved, I just took over a setup on KM C458 it is doing same exact thing you described, thanks.
I have For Sale The Toshibas eSTUDIOs 281c, 351c, 451c System board(Main Board). Part Number and Description Is : 6LE48579000 ( ASY-PWA-SYS-410S ) anyone Interested please send me an email or call me...
Hi! For sale I have Toshibas eSTUDIOs 550-650-810 GL-1020 and eSTUDIOs 25-35-45 GL-1010 controllers Firmware Ready HDDs. Eliminate the hard work it is to use the recovery CDs. cut your work by more...
Hi there, Turn the machine off, then power it on while holding 6 + Start , let go till you hear a bip. that should take you into the maintenance mode.
It's my under standing that there is a new style IH-board that fixes that problem. this are my old notes hope it helps.
C471 error code -IH bulletin for board.
Also get 15amp/250v fuse. Brd=...
Hi! I have a Konica Minolta copier for sale at $750, Works like a champ. I don't work on this models, so if interested, call me at 909-599-1886 x101, my name is Julio. regards
Tell your customer to check the web tool of the machine to check the current status of the machine under the "device" tab.
Hi! I have manuals for sale. carry Sharp - Toshiba - Ricoh - Lenier - Savin - HPs - Kyos - Panasonic & Mitas. :cool:
I have Toshiba print/scan enablers for sale.:cool:
Print/Scan GL-1020 controller for e550/650/810 also comparable w/ sharp/imagistics(do your home work) for sale and also available (1)gm-2010 & (1)gm-2070 both print/scan enablers. :rolleyes:
well first of all process of elimination. crooked copies from all the trays or just one. narrow it down by placing an original on the glass and run 1-5 copies from drifferent trays to see if you get...
the grey scale is a good idea,but it doesn't produce the affects you may want to get try pritingout other internal prints like the control menuor the functions list, that way the drum is not totally...
lines on both print and copies, it might be time for a PM...! simple fix.:)
I've worked with two just recently one trainned on sharps and the other trainned on Kyoceras. great techs.....:)
Hi
I have these manuals as well, send me an email so I can send them to you.
I dont have the cds that come with the copier. I'm a ble to get on to the web utility page fine and tried to configure the macheni that way in the one touch button option but was unsuccesfull. where...
Hi,
I have Toshiba parts for sale. - EPU,DEV,MO,FU and some TBU KITS for estudios 310,311,3100 series, eStudios 810 and 850 series, some stuff for eStudios 4511 and 451c series. :)
Hi,
I have parts for sharp models, mostly PM kits drums, rollers, if interested send me a priv-mess or email me at Julio_119@yahoo.com :)
Planotech
Let me know if you're still interested in buying the controller, I have one for sale.
I agree this machines are great. if you have a lot of problems with off the bad, make sure you test the machine before it goes out and if the machine is fine and has issues after a service call...
Let me know if you need other parts for that model I have kits for that machine and more.;)
Hi I have a Di2510 and I see that it has two scan buttons in the panel. I was able to setup the printing, but the scanning it being a pain, can Anybody help me with this - do I need and application...
If you need to print and scan, you need to have a gm2070 enabler. if you do setup the printing by going to UF - Administrator - password - NC and setup the machine with and IP address, once that is...