Hello, Has anyone found a generic toner for the M3040idn and 2535idn that does not cause problems?? I tried Precision Roller and it caused the drums to fail early, way early. How about Katun anbody??...
Type: Posts; User: anthony123
Hello, Has anyone found a generic toner for the M3040idn and 2535idn that does not cause problems?? I tried Precision Roller and it caused the drums to fail early, way early. How about Katun anbody??...
I need some suggestions on the most reliable least troublesome 3-5 year old Color Kyocera MFP. I have been servicing B&W Mita/ Kyocera/ Copystar Machines for many years and have serviced a few...
Let me know what you need and I'll give you a price and ship it to you.
Fax unit is gone.
PCU is Worn
Fuser looks good
Hello,
I have a customer that I sold a used 420i with Fax System (s) only. I want to max the memory with the 128mb expansion. Does anyone know if this is proprietary memory or can I use generic and...
Hello I have an almost new MP3352 PCU #D120-3000 I would like to put in a 2027. Anyone ever tried this? I know the 1027 type pcu can go in the 3352 I don't know if it goes both ways? Thanks in...
The clutch on this machine was dirty and rusty however after a good cleaning they continued to have this problem. The customer has been living with the problem without complaining until a recent run...
P.S. print out this forum and let him see what the techs are saying.
I think using Generic toner is a good idea. My therapist thinks so to. And he knows about toner better than your boss......
PS: the registration is always off the exact same amount every time it goes out...
Thank you for the replies. I as well think it would show up on printing. I also think that since the paper is running in the 11x8.5 position the clutch would cause the registration to be off <---> ...
Hello, I have a KM-3035 Connected Machine That is having intermitting registration problem. They told me it was only from the Document Feeder but I have ruled out the Document Feeder because it...
Hello All, SRDF-2 one time out of ten moves image down the page and cuts off bottom. It always moves the image down the same amount on the copy. I cleaned all rollers in the feeder, while watching it...
Hello, The biggist problem with the Km or CS-1820 is the cost of the toner unless youre OK with Generic toner. I try to stay away from genric toner However if anyone has had good results with Katun...
Hey All, I have a LD016spf that I had hooked up to my network in the shop. The other day we had a bad storm and my router got wacked I replaced the router only to find that my cream puff 7000 page...
500 sheets still no Problem....
They Should have called them task betas, The engine is just like the 3035, 4035 but I keep having strange issues I never had. Oh well onward and upward.....Ant
Found conflicting info on this model mp2000 mp2000L, found 3 that say it can Scan to Email: SMTP, TCP/IP (IPv4)
First of all find the ip address of the machine, Then use IE to access the machine, you can set the machine up to scan to Email with the browser. You may need to go into admin mode. You will need the...
Do yourself a favor and keep it scan to email only, It works great, everyone can scan to there own email (no one has to share) and all is good in ricoh land......
So,,,, What was the fix ????
I needed a type 1515 pcu and did not have one. I did have a type 1013 pcu. Soooooo I took apart a brand new 1013 unit removed the developer and put in into the 1515 unit. Then I put the whole upper...
Thanks zoraldinho, That is such a clever design they came up with, WTF. Anyway I finished the machine tonight and it is working minus a few plastic snap tabs. Thanks again for your help.
Can someone give me directions (or point me where) To remove the fuser unit? I looks like the scanner has to be removed... Is that correct? Have hammer at ready. thanks Anthony
Yeah, I dumped a lot myself, Oh well I'm shure some are still around. Thanks
Hey, are you using OEM supplies? Generics can cause headaches....Ant