Before that try to change UI cable.
Type: Posts; User: adriansto
Before that try to change UI cable.
Set NVM location 711-188 = 2
Before that print the FRENCH Verbs page in yellow then cyan then magenta and black. Stop printer while printing and check image on drums. If these are ok next guilty part can be 2nd BTR. You can...
If it can copy from glass then problem is dadf unit.
You must check error codes
First step is to reseat all connectors and electronic boards from CCM and network controller.
Also check the fireware cable that links CCM and net controller.
It is good ideea to have disgnostic...
Check the nvm with machine nvm sheet.
What software version do you try to reload?
Most likely you need a service manual.
Do you think the printer have sensors for reading the media colours?
Try to see the image on drums and ibt as I said.
Yes you have right. Panic stop when print A3 size paper and check image on IBT. If image is NOT ok on IBT same procedure and check image on drums. If ok on drums then must check 1st BTRs or btr hvps.
Old machines. What about cleanning the ROS ( inside too )
If machine work as it should then your usb stick not works properly or the machine usb ports are disabled.
Did you tried all machine's ports?
Can you print configuration report and send it to me?
[/LIST]
Special altboot is different from each software level. What special altboot files did you tried?
You can remove hdd/ssd clean all partitions ( format hdd ), put the hdd back and try with...
The most common = broken or weakened spring on registration transport assy, registration pinch roll does not have enough pressure on registration roll also the two spring from inboard and outboard...
How much is the skew on A3 paper = 5mm, 10mm over 10mm?
From which tray(s).
As I remember there is alignment calculator sheet you must use. Also a lot of registration procedures for trays, registration assy, custom paper profiles, etc. You must do all these procedures from...
Turn off proxy server in printer TOOLS -Network Settings
Check the fuser assy for how easy the fuser rollers move. Someting stop the main motor to rotate.
More informations about what you did to machine.
What is the error code show on small 7 digit display?
It is ok. My mail = stoadis@gmail.com. Please post here in forum the Fiery's configuration pages or send it on my email address.
Fiery communicate with V3100 using ethernet crossover cable for Stock library.
On Fiery the top ethernet port is for connecting to your PC/network and the lower ethernet port is the place you...
Before this check the printer ip = 100.100.100.101 and Fiery ip = 100.100.100.102
New hdd/ssd + load software.