Search:

Type: Posts; User: adriansto

Page 1 of 20 1 2 3 4

Search: Search took 0.07 seconds; generated 57 minute(s) ago.

  1. Replies
    3
    Views
    80

    [Misc] Re: Faint copies on the bottom

    Old machines. What about cleanning the ROS ( inside too )
  2. Re: AltaLink C8130 refusing to altboot or software upgrade

    If machine work as it should then your usb stick not works properly or the machine usb ports are disabled.
    Did you tried all machine's ports?
    Can you print configuration report and send it to me?
  3. Re: AltaLink C8130 refusing to altboot or software upgrade

    [/LIST]

    Special altboot is different from each software level. What special altboot files did you tried?
    You can remove hdd/ssd clean all partitions ( format hdd ), put the hdd back and try with...
  4. Replies
    8
    Views
    412

    Re: Xerox 700 crooket or skewed

    The most common = broken or weakened spring on registration transport assy, registration pinch roll does not have enough pressure on registration roll also the two spring from inboard and outboard...
  5. Replies
    8
    Views
    412

    Re: Xerox 700 crooket or skewed

    How much is the skew on A3 paper = 5mm, 10mm over 10mm?
    From which tray(s).
  6. Replies
    8
    Views
    412

    Re: Xerox 700 crooket or skewed

    As I remember there is alignment calculator sheet you must use. Also a lot of registration procedures for trays, registration assy, custom paper profiles, etc. You must do all these procedures from...
  7. Replies
    3
    Views
    262

    Re: Primelink C9065

    Turn off proxy server in printer TOOLS -Network Settings
  8. Replies
    1
    Views
    168

    Re: Xeror 6515 - ERROR

    Check the fuser assy for how easy the fuser rollers move. Someting stop the main motor to rotate.
  9. Replies
    99
    Views
    14,241

    Re: Altalink 80XX Series special Altboot method

    More informations about what you did to machine.
    What is the error code show on small 7 digit display?
  10. Re: Xerox Altalink C8030/8055 NVM, Searchlite etc

    742-869 = 0
  11. Replies
    9
    Views
    618

    Re: Xerox stock library manager problem

    It is ok. My mail = stoadis@gmail.com. Please post here in forum the Fiery's configuration pages or send it on my email address.
  12. Replies
    9
    Views
    618

    Re: Xerox stock library manager problem

    Fiery communicate with V3100 using ethernet crossover cable for Stock library.
    On Fiery the top ethernet port is for connecting to your PC/network and the lower ethernet port is the place you...
  13. Replies
    9
    Views
    618

    Re: Xerox stock library manager problem

    Before this check the printer ip = 100.100.100.101 and Fiery ip = 100.100.100.102
  14. Re: Enter Current Password Message is Displayed at Start Up

    New hdd/ssd + load software.
  15. Replies
    4
    Views
    514

    Re: Xerox V80 Metal 2nd BTR

    I must search in documentations for the kit number and see what contain. What tag are on printer?
  16. Replies
    4
    Views
    514

    Re: Xerox V80 Metal 2nd BTR

    Not a good ideea to use metal roller with 80gsm. There are scripts for every software versions and machine tags: 13,20 or 21 however you must have software version 35.41b or higher and script...
  17. Replies
    15
    Views
    2,213

    [Jamming] Re: Erros 075-100 / 075-109 / 075-135

    Service manual for C550/560 is available in pdf format. C60 almost same machine as C560.
  18. Replies
    15
    Views
    2,213

    [Jamming] Re: Erros 075-100 / 075-109 / 075-135

    So read again the procedure for the 3 error codes you have and check every parts involved.
    For me looks like poor electrical contacts or there is one way clutch gear.
    Also optical sensors can do...
  19. Replies
    15
    Views
    2,213

    [Jamming] Re: Erros 075-100 / 075-109 / 075-135

    Before MCU the procedure says to replace IOT Driver PWB.
  20. Re: Versalink B405 dc330 doesn't turn on main motor

    Read again the manual for you know how to check motor in dc330
  21. Replies
    99
    Views
    14,241

    Re: Altalink 80XX Series special Altboot method

    You need these files for special altboot. First must write the sd card image file on new 4GB sd card and put this new sd card into machine.
    You cant use image file from another machine used sd card....
  22. Replies
    8
    Views
    883

    Re: Altalink C8035, fault 316-720

    You need these files:
  23. Replies
    5
    Views
    660

    [Error Code] Re: c60 error 010-321

    Not reset for this. Into C60 service manual the next step is to replace mcu pwb.
    But into C560 service manual is intermediate step to verify fuser drive motor.
    Also check voltages lines between MCU...
  24. Replies
    5
    Views
    660

    [Error Code] Re: c60 error 010-321

    Fuser nip fault. Check if fuser is installed corectly into the drawer, paper inside the fuser or fuser contacts,fuser nip sensor.
  25. Replies
    2
    Views
    427

    Re: Xerox C75 Updated EDOC Required

    705P01343 from May 2013. Last update from GSN via BUS was on Feb 2016.
    As I know in Prolibro dont exist a new version For this machine.
Results 1 to 25 of 499
Page 1 of 20 1 2 3 4