IS this working with mpc 4500 & 3500????
Type: Posts; User: randula7
IS this working with mpc 4500 & 3500????
if anyone have User Account Limits Application for MPC4500 please help me my email randula7@yahoo.co.in
Dear all
how can I setup user codes stop print & copy's when user reach 2000 print or copy's on mpc4500 machine.
please help me with Firmware Imaging Toolkit 2006 & bizhub c252 latest Firmware. I have problem with machine c252 error c-c163.
please send me download link to randula7@yahoo.co.in
thank you
13704
Happy New Year 2012!
Regards,
RANDULA SIGERA
can you please send me "Firmware Imaging Toolkit 2006"
thanks
my email randula7@yahoo.co.in
there is no EEProm in the drum for fs1028
what is your problem or error?
now you can repear it inside of replase p.w.b see the image I attach there.
I repear engine PWB.it is R275 and Q36 in engine PWB.then Change upper lift motor all works fine.
here I attach image wich componant you have to replase in the engine PWB.
I have problem with KM5050 Defective upper lift
motor and I replace motor to check.I have seen motor rotate but never stop then replace paper feed unit Same problem.when machine turn on motor begin...
[/URL]Blackcat is right C180 is a serial number mismatch.
but you canTry with U004 Displaying the machine number.
U004 then under The tuch panel you can see [EXECUTE]
Press [EXECUTE] on the touch...
(runs over 20 copies) did you check fuser is it good?
is it CF223 or CF323
CF323 is Return address of Page class when doing FAX TX/RX is other abnormal error Entity (Config, BOX, etc.) access error
Did you upgrade all firmwares with new version.(main PWB, engine PWB, scanner PWB and MMI)
EXP:you upgrade main PWB and didnt upgrade MMI it will give you CFB30.
MMI for Panel ...
Realy I love to read your post its help to tech......rep++
300K.but its can be damage befor.I have km-c2525/3232
2 units flat spotted.making noice dok,dok since instalation date and 2 units broken.you can claim warranty.
did you upgrade all the firmware. EXP- if you upgrade main then didnt upgrade MMI its will give you error.upgrade firmware of main PWB, engine PWB and MMI.
also check connection between Operation...
7148see the image red marks and check in the scnner mirror frame its can be out of position
did you check developer unit?with some d.v units you can make 1 or 10 copy's maybe more its can be 100 or more but after its hard to rotate,change developer unit and see. also check if drive rotates...
Drum reset: [MENU] / 1-common setup/17-drum reset
Perform after drum unit replacement to set MC current
Developing unit >Toner installation:
[MENU] / 1-common setup/14-toner install/On >...
clean the scanner mirrors
Check your toner kit.
is it open well some toners not open well and did you check toner feed solenoid is it working.how about quality of copis.i remember thear is one belt to drive toner kit.its...
check developing bias control voltage,transfer control voltage, and the separation control voltage with U101. stop paper befor fuser unit check is it same prob or not then check fuser control...
Open the cover make copy see fuser heater M & S working normaly or not. its very hard to see because fuser unit cover (very littel space) . did you check electrical outlet.check the voltage levels of...
clean Optical section (Mirrors ect)