Having an issue with duplex jams on this machine. Code is 0103 at PS24. Only jams during duplex. Read another post stating it was the vertical path motor M27 that could be the culprit. Just...
Type: Posts; User: cweber0531
Having an issue with duplex jams on this machine. Code is 0103 at PS24. Only jams during duplex. Read another post stating it was the vertical path motor M27 that could be the culprit. Just...
I replaced the entire assembly including the drive assembly.
Having issues with an IRC4080 E-000008-0001. Replaced fixing assembly, cleared counter, cleared error, updated system software and still having the same error. Any help would be appreciated.
Yes, I even tried another port that was active. It is displaying the check network connection.
Have an IR3030 at an account, was working fine, now it won't receive a network signal. Reset the boot rom, ramm, main contoller and hard drive. Cleared out the memory, still no signal. Checked the...
Having an intermittent jam on an IR5065, jam code 0103 at PS26. Everything checks out, sensor roller etc. Happens randomly on large print jobs after 20-50 pages. Any ideas on what it could be?
Could you be more specific...in order to remove the finisher, the rails are catching. How do i get the rails to release from the guides? I do not work on this model very often, mostly segment 5...
I need to replace the finisher on this one, can't figure out what is causing it to jam up. I'm having trouble removing the finisher from the rail guides. Was hoping one of you could give me a walk...
I have an IR3035 with finisher S1 that is having issues. The first stapled copy comes out fine but then the rest will not staple. The exit rollers stay in the up position and wont push the paper to...
I did the door upgrades and removed the small black foam pads and I'm still getting duplex jams code 0107 at PS13. What else could be causing this?
I set the printer options to black & white in additional funtions but it still defaults to auto color select. I have the copy default to B&W but how do I get the print drivers to default to B&W.
IR3030 and IR3045...i set up a scan to file on another pc that wasn't previously set up and it worked. The pc's that were set won't work and won't let me browse. It keeps saying no response from...
This has happened at 2 accounts where the scan to file SMB aren't working. They worked up until there was a power outage earlier this week. Now they will not go through and getting error #751. ...
Had some CQ issues turned out to be the transfer belt. Interface is plugged in but not working. Is there a way to initialize the sensor?
I didn't clear, it came in cleared. I put the values back in.
OK got it back to LTR it was the setting DK-P. This was a dc-con clear. It is now showing an error check side paper deck and when i load paper it won't allow me to select. Any ideas?
Machine shows universal send in configuration but the tab is missing. Also shows installed in service mode. Initialized data settings and still no send. What am I missing?
Hey guys, not sure how this got changed but the LCC is showing A4 and I'm not sure where to change back. All other cassettes show LTR.
I'm having some CQ issues on a 5180. Replaced drums and transfer belt. Cleaning blade next. I attached example, it only happens after about 8-10 pages. 8380
Machine running very slow and intermittently giving this code. Points to main controller pcb. Anyone else run into this code?
Hey Guys,
I don't work on color machines but am helping out another tech and don't have SM. Can someone let me know what this code is including sub code. I appreciate in advance.
North Shore
This issue came back with the same client. I added the DIAS and it worked fine, now when you go to print is says cannot get device information. It is only affecting one of the machines, the other...
Yeah and its starving developer.
I'm having the same issue with a 5570. What was your fix?
We are currently looking for a technician that is experienced in Canon machines. PM me if you are in the Chicago area and have experience with Current Canon models including 5570, 4080, 5180, 5185.