Search:

It's sealing envelopes when printing..... Tried different types of envelopes. Any suggestions???

Have you done the 05 calibrations in the service manual? After replacing any of that it needs to be done. 05-395 and 05-4719

Has anyone called tech support lately? I definitely don't like the new format. Seems like every time I call them it's reformat the hdd or reseat the memory. What happened to the call center in...

I have a mj1022 that is not lifting or lowering the upper tray. U can see that the bend in the tray. But do you still have the document for that? If so can you email it to me? ...

Go into 1* mode. Then 102 then initialize. This clears the print que. But you will lose fax info but alot easier than reformatting the hdd

Weird one. Did a color pm. Did calibrations . Everything fine. Two days later Now getting a "service recommended for spc" also can't do a 05-396 adjustment. It gives me an error. Has a 2...

Looking for work in the wv area. Any available?

If you are having shadows around images clean the 4 laser slit glasses under the drum/dev carriage unit. It's easier to just take the entire assembly out then reach in a turn the white gear on the...

Have had this issue before. If you change the registration and upper drawer feed sensors the problem will go away. Even if they test good in 03 mode, replace them.

I use wd-40 on feed separation and pick up. Works great. No alcohol. Ever heard anything about rainx on radf slit glass?

Any thoughts

Installed one of these at the customers Site a year ago. It has the network expansion kit installed. But we can't figure out how to obtain the ip address. Toshiba said it was inside the box that...

4fax for the copy side and 70fax for the print calibration chart.

Change 05-354 from 10 to 15. 20 Max. This changes how far the original feeds into the Radf. That has helped me on the mr3021

I just got back from the es6550 training in Chicago. The instructor said the ebx machines and their fuser/fuser drive are a non issue now. We were instructed to use their white grease in the fuser...

yea....my thinking too...just wanted someone else's input...cause i've seen it more commonly on the AR M350 style....but never on this one....thanks for the help.....have a good day

yes wazza i did run into that error....i noticed it in the trouble history, but the customer never called about it so it they must have reset it....so far, after i changed the SCAN PWB, it hasn't had...

Had a machine start saying PLEASE WAIT and not letting you select a 2 TO 2 or a 2 TO 1 copy when your using the document feeder....then I changed the document feeder out with another one and it...

thanks for the quick response.....i was thinking the same thing.....just needed some back up.......thanks again

just trying to figure out if you are supposed to grease the upper heat roller bearings when replacing the roller.....the book doesn't say anything about it......just curious if anyone else is doing so

specifically the sharp AR 202 NT / AR 270/310 Toner cartidges

anybody out there know a good way to seal a toner cartridge and keep it from leaking????????

awesome.....thanks

thanks blackcat.....PDF would be fine......or something i can plug into photoshop.......i can't seem to find any logos on any of sharp's idnc sites.......thanks again for your help

hey all....i'm trying to find somewhere i can get a authentic sharp logo......any ideas?