how to trick or repair dc controller cause poor transfer, without replace them with new one unit. anyone know
thank's
Type: Posts; User: creppy
how to trick or repair dc controller cause poor transfer, without replace them with new one unit. anyone know
thank's
check and clean touchscreen flexible cable or replace touchscreen
This forum is no longer peaceful, mutually offense each other, especially thread related with smal progie like SST, firmware. time to move to another forum,
this word is really bad "I can post what...
hahahah very funny, nice to meet you teckat, is that you? :p
I Agree with you marcelcorzo...,:) "many newbies become expert forists in sometime, and they',ll remember they were helped, so they'll give it back the favour. So newbies are in the right place....
Pak apa jual juga toner untuk ir7105 karna pake toner sa**fi*** hasilnya cuma bayang aja. trima kasih
ok thanks it work
try this service mode lv1 | adjust | Adjust xy | Adjust-S rise it value, the value is up to you, but me set in 100 it's work for me,
ir6570 error E002, when I replace the thermistor has a new all, how to handle it so now I had to repeatedly reset the machine until it is ready, if it will not appear E0002, but after ready the...
tecktat right, short to frame and machine go to system protection mechanism
I have experienced similar problems make me frustated, my ir6570 will not boot up only power light blinking after lightning storm, that problem solved after i try replacing maincontroller with other...
i still not understand, universal send kit is hardware or software, where to buy and the price and how to install?
thank's for reply
How to copy file stored in mailbox to computer harddrive and convert to pdf automaticaly not one by one as using jbig image viewer and remote UI.... please comment this .. for any suggestion i...
Hello,
Anyone know where to buy or download canon MEAP aplications, please tell me
thank's?
That's right just replace maincontroller for testing.
Thank's remember me... hold my plan and wait for original part
yes after clearing error code i get the same code after machine ready for about 2 minute
check is any button push continously or jammed because only one button pushed panel will locked
Just try to clean touch screen cable, tested by me it work like new, or you can replace only touch screen without LCD with new one
ok i will try it, you know what a risk of use ir5000 thermistor on 6570?
yes ir6570 have two thermistor (main and shutter) in same harness but i think, can i change only main thermistor with ir5000 mainh thermistor and create new harness. is any tecnician has try this???...
Is ir6570 main thermistor and ir5000 main thermister can interchangeable ?
please comment this
yes i have a paper jam and clear it, i also have check and clean thermistor, shutter thermistor it's ok.
i will check actuator sensor and return spring thank's for this teckat
Ir6570 show up E000001-0001 any suggestion?
thank's b4 and after for any help
chek potensial control, potensial sensor, scan lamp, laser unit, and reader controler