Search:

Type: Posts; User: Foo

Page 1 of 8 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    7
    Views
    858

    MP C306 drum disassembly...

    I have a Cyan drum from a C306 that's leaving a line on prints and copies.
    I replaced the drum with a drum from a good unit (my personal unit) to confirm the problem was the Cyan drum unit, it was....
  2. Re: This tired old machine has me stumped...MP2550, Gear that drives the main fuser g

    You put me in the right place!
    Thanks, on further inspection of #5 which is the gear above the gear I need.
    I needed this:

    https://www.precisionroller.com/img/H4064.wh.jpg
    Thanks again!
    Jeff...
  3. This tired old machine has me stumped...MP2550, Gear that drives the main fuser gear

    Never mind...Sorry to have started this thread.
    But I found it, Bracket: Fusing : Drive P/N: B090 1170


    Yeah I know it's old, and it's tired, but it was still running until yesterday.
    Got a...
  4. Replies
    9
    Views
    1,225

    Re: Looking to buy a Type M12 Postscript 3 card...

    Are you talking about that part of my post that's says " I see some online" That would be me looking at available options, PR, Google, eBay.
    I would prefer to give a fellow tech a few dollars and...
  5. Replies
    9
    Views
    1,225

    Looking to buy a Type M12 Postscript 3 card...

    I delivered a MP 3054 to a customer last week their IT hooks up everything in the offices.
    I get a call from them telling me they can't connect to the printer to print.
    Turns out they are ALL using...
  6. Replies
    10
    Views
    1,707

    Re: MP 2550 Tray 1 lift erratic...

    Too funny...I have a Tupperware container in my tool bag.
    Every time I open it I cuss this crazy spring that pops out.

    Guess what spring I'm talking about...just went out and checked, YUP I had...
  7. Replies
    10
    Views
    1,707

    Re: MP 2550 Tray 1 lift erratic...

    Is that the spring that hooks to levers attached to the lift motor.
    I remember a 3-4 inch long spring...possibly loops on each end?

    Jeff
  8. Replies
    10
    Views
    1,707

    MP 2550 Tray 1 lift erratic...

    I can hear the lift motor moving in 1/2 second movements until it settles in. But if you bump the machine or run paper out of Tray 1 it starts the movements again and starts taking paper from Tray...
  9. Replies
    8
    Views
    1,532

    Re: MP C5501 SC 547. Blown 15a fuse on PSU

    I'm back onsite and installed the new PSU.
    I reset the SC 547 and rebooted again.
    It looks like it's fully powering up until late in the boot cycle and the SC547 returns. So there are additional...
  10. Replies
    8
    Views
    1,532

    Re: MP C5501 SC 547. Blown 15a fuse on PSU

    Just got back from this call. Certainly feels fishy that this happens with electrical work going on.
    But, the customer is happy with me and knows this isn't my or the machines fault.
    They may try...
  11. Replies
    8
    Views
    1,532

    MP C5501 SC 547. Blown 15a fuse on PSU

    Friday a great machine... Tuesday SC 547 and a blown 15a fuse on the PSU. The customer has had a electrician in the building since last week and he worked all weekend. Now suddenly there's a SC 547...
  12. Need to purchase a couple of basic machines...MP2554 or MP2555?

    These 2 units are for a couple of basic use customers.
    I have them located and a call in to purchase.

    I'm wondering the good and bad about these units, I haven't sold any machines in quite a...
  13. Re: MP 3352 Get's a "Functional error" after entering Auto Off mode

    I just set SP5730 to 0.
    This machine does not have an SP5191

    Thanks I'll let it sit 4 hours a see what happens.
    I have sourced main bcu board in case nothing else works (haven't purchased yet)....
  14. Re: MP 3352 Get's a "Functional error" after entering Auto Off mode

    Parts Manual shows a BCU board D120 5122...same thing?
  15. Re: MP 3352 Get's a "Functional error" after entering Auto Off mode

    Yes, the thread is 2 weeks old. Also the unit is a MP 2852 (my bad)

    SO a follow up...
    Reinstalled latest firmware (checked all the boxes). Tested, still has a SC 990 error after sitting idle...
  16. Re: MP 3352 Get's a "Functional error" after entering Auto Off mode

    After an "Auto Off Timer" The machine now throws a SC990.

    Reboot and everything is great and works. But after any auto off I get the sc990.

    I'm right at the point that I'm thinking controller...
  17. Re: MP 3352 Get's a "Functional error" after entering Auto Off mode

    I was just reminded that we had to check boxes to start with, indicating what modules we wanted to update.
    We checked them all.

    Jeff
  18. Re: MP 3352 Get's a "Functional error" after entering Auto Off mode

    Just ran out to the shop...I had left it to run and it had a SC990 displayed.
    I also reset SP 5875-001 to 1...it was 0.

    Also when we did the firmware update, it was a SD card with a package on...
  19. Replies
    31
    Views
    6,264

    Re: firmware update mpc3003SP failure

    Just had this same thing happen last week. SD card took a dump and we reloaded on to a new SD card. Updated smooth as silk after that.

    Sadly the firmware update didn't help mine.



    Jeff in...
  20. Replies
    7
    Views
    1,388

    Re: Some customers have awesome insight!

    Daaaaaang Suuuun, That is some kinda mess. But I have seen 1 almost that bad, and by the time I got it out it was that bad.:cool:

    Jeff in STL
  21. MP 3352 Get's a "Functional error" after entering Auto Off mode

    Been doing this a while (20 years).

    You guys have always been able to steer me towards a fix.

    So far...
    Replaced the HDD, formatted and tested...results> boots normal, makes great copies, gets...
  22. Thread: Ricoh mp 4002

    by Foo
    Replies
    15
    Views
    1,865

    Re: Ricoh mp 4002

    I've been working on mostly Ricoh's for 15+ years and I always call in help when it comes to Firmware upgrades.
    Way too easy to brick a machine or screw up the update.
    So the once in every 2-3...
  23. SP C831DN printing B/W fine, colors aren't showing up... Model Similar to MP C4502 ?

    Try number 3 on this post...lost the first 2 into forum hell...LOL

    Ok went to a call today on a SP C831DN. Never seen of one before today.
    Had to beg and bribe several people to get the secret...
  24. Replies
    6
    Views
    3,239

    Re: SPC831DN fuser past 330k, is there a fix?

    I was told that after 330K the unit will not respond to a counter reset.
    But that it would have to have a "new" fusing unit to reset the counters.

    I have read the reset counters procedure but...
  25. Replies
    6
    Views
    3,239

    SPC831DN fuser past 330k, is there a fix?

    Hello everyone,
    I'm a pretty seasoned Ricoh copier tech, but have limited knowledge of the Ricoh printer line.

    My old church has a SPC831DN that they tried to squeeze every copy/print from and...
Results 1 to 25 of 199
Page 1 of 8 1 2 3 4