if you can 't solve this ,this is not the forum,
this is basics.
that is why evrytihng gets blocks due to Mc GYvers.
become a pro.
Type: Posts; User: taskalfaman
if you can 't solve this ,this is not the forum,
this is basics.
that is why evrytihng gets blocks due to Mc GYvers.
become a pro.
check these two service tips in add.
this shoudl solve
Have fun
hi,
i would change tr belt, we had a similar underlaying problem and the cause was the tr belt
have fun
dear all,
Low-resistance contact grease 302LC94790 GREASE FLOIL G-347CA(10G) SP
have fun
TM
hi,
each devive you work on, => unplug power cord.
this will avoid side-effects,of non powering off when changing parts.
so the only way now is to unplugp device.
change part;
plug in and...
hi,
When it is clogged, you first have to look what the reason is,
and check what the final solution, which part is infected.
my opinion: => parts which can be infected
is the wtb turning? => wtb...
please take some action, and give feedback.
have you changed the toner hopper like suggested?
did you check all the contacts on the hopper?
thanks for feedback.
hello,
you can disable this read the manual.
"check destination before sending"
have fun
hello,
most likely try to change the toner hopper, (or check contact). this always solved my faint prints.
i never had transfer bias which was defective.
have fun
I think you can use the one of TA-xx51ci series
BE
fk issue
had in already on ta-4550ci devices
BR
the solution is the solenoid @ exit which is not postitioned properly.
no parts needed.
just remove right cover and you can access the solenoid
please feedback
hi,
I assume it is due to the hvt pcb below the scanner.
have fun
Someone experience and an explanation for the error code F3D4.
new device and can't find any explanation of the reason/cause for this error.
Any hint is welcome
most likely spring insite the device which is out position due to removal of old Transfer belt.
If you measure you will know. Normally you should see it also visually.
have fun.
hi,
we have two devices in the field.
one approx 14.0000.000 prints (13 months) and the other 8.000.000.( 9months)
they are printing smoothly with fiery.
no major issues.
Hi,
change the tr-710, most likely one spring out of position or plastic broken.
have fun
google cloud print will not be supported anymore by Kyo
hi,
most likely is the black holder defective, the black stopper lever is probably gone.
have Fun
nope, there is no service mode to change this. just try to "teach" your customer how to do it using the manual.
Hi,
just change transfer belt together with the drum.
problem should be solved.
we had 2 cases.
Have Fun.
you just putted different levels as asked
asked
O-2
2-5
+5
suggested
0-5
5-10
+10
hi all,
kyo released a eval version for this.
have fun
hi Guys,
some feedback
i went to the machine together with Kyocera HQ.
they initialized machine with sim 20.
possible reason electrical noise!
power on machine => problem solved.
we...
[are you using original toner?
design is not the same of toner cartridge and this will give the problem.
pls feedback.