We are a Ricoh, Kyocera Dealer/ Service Company. One of our larger clients also has a number of IR Canons and wants us to service them. We have techs with Canon background but not a good source for...
Type: Posts; User: Sam Tofu
We are a Ricoh, Kyocera Dealer/ Service Company. One of our larger clients also has a number of IR Canons and wants us to service them. We have techs with Canon background but not a good source for...
We are a Ricoh, Kyocera Dealer/ Service Company. One of our larger clients also has a number of IR Canons and wants us to service them. We have techs with Canon background but not a good source for...
Thanks Femaster. Yes, that seems to be case re touch screen. Will see if customer willing to invest in additional repair cost for replacing touch screen.
Initially just a change Drum'Image unit warning. However, when entered Utility/Counter THEN on right side with meter/Check detail it was sort of faded out and non responsive. Poking around here found...
Mainly work on Sharp, Ricoh and Kyocera. Have manuals for this model. At basic pass through didn't see a reset.
TIA
Thanks re the C ring input!
Anyone know if upper 277 fuser can actually fit in 317. I know part numbers are diff. but seem to remember back when we had a lot of these in field that one of our techs actually swapped parts from a...
Thanks Mansart!
In case you haven't run into this one: Complaint strange squealing noise or binding noise. Often when go to check out can't duplicate. Then once hear noise appears to come from various areas.
We...
All the vendors listed in thread offer Sharp parts.
Few notes:
1. For us OES has better pricing
2. If you go the Precision route, they are convenient. If you want to buy at a discount from them...
We have customer long drive away so just checking. They got several new Windows 10 computers. So am assuming just set up 10 like we do for others 10's for scan to folder but then turn 0n SMB1 both...
Mainly work on Sharp, Ricoh and Kyocera. Have manual for this but not finding adjust/calibra for issue.
Issue: On platen glass copy is correct density. Print Engine density correct. However, when...
Thanks, appreciate re DV ? ! Yes you are correct re process units being diff.
Have a M317 with bad mag roller. Looking over our old scrap parts machines. Most DV units and misc parts pulled and set in piles. Unfortunately, some of the M317 and 277 series got mixed together....
Mis-typed - actually 2ndary failed after 4.75K. A used 2ndary corrected making good copies again. Took "new" one apart, couldn't figure out what failed about it. But yipee. Problem solved.
Thanks Black Cat. Yep. 2ndary tranfer failed after 8.75K. Can't figure out what's wrong with it but put in a used one and that corrected issue. SO will order in another new one.
Will check out as suggested. Also will take a used 2ndary.
Yeah the pointillism was the closest I could figure to describe it.
Thanks again!
That was first area I focused on. 1. checked belt wasn't partially contaminated. 2. checked holders, connectors,contacts. 3. looked for cracked areas that may allow uneven contact.
All I saw where...
MX-4501n. New transfers primary and secondary about 10K ago.
The scanned image has details on it. Scanned image is a "sky shot" just so can see issue more readily. Issue happens with blk or on any...
Thanks. Will try that approach.
Expensive hassle to reverse data security. Also expensive if just one data eprom goes down. Have to replace full security kit or replace all the Main boards.
Meter at 252K. Toner rapidly dumps on front edge near auger ilosest to waste toner. With dumping issue have changed DV, drum, blade, Charge. Checked seals. Waste Auger funtioning OK. Noted DV...
Below comments are not knowing your familiarity with Sharps so not trying to share super obvious unless perhaps you aren;t familiar with them.
Also, depending upon how long "running and running"...
A company we service brought over a MX-M263n from a branch. 4 computers have WIndows 7/32 bit and one has 7/ 64.
When Installed V3.3 OK on the 3 with - 32 bit. all functions as usual work.
BUT...
Blk meter 278K Color 77K
Initially Cyan DV almost void of toner. Checked TONER motor was OK. Changed Sensor, no diff. Changed DV UNIT with used with low meter. ALL seemed OK.
(Just in case...