I am a Canon trained engineer in the UK, looking for new opportunities outside of the UK
Trained on most of the Canon current range (Not iRC6800, iRC3180, iR2525)
Are there any employment in the...
Type: Posts; User: MrB
I am a Canon trained engineer in the UK, looking for new opportunities outside of the UK
Trained on most of the Canon current range (Not iRC6800, iRC3180, iR2525)
Are there any employment in the...
One thing you can do (Ive seen done by other engineers) is turn the option to stop that message being displayed
Personally, I would leave it switched, otherwise, you could end up with error...
Good chance its the drum not turning, and the coupling on the drum is damaged
Had this a couple of times
Can anyone help.
Having a right nightmare with the above with this error code
If the device is used on black only, No problems
Once you try and copy/print any colour it throws up E0020-01A0
I...
Service Mode
LVL 2
Options>Display SW>
Then look for UI-MEM
set to 1
Exit service mode
Reboot the device
and it will now show the option to scan / Access the memory stick in there
No something stupid as the volume turned down by any chance..??
If you press "On Hook" on the display, do you here the relay clicking at all..?
Just a wild stab in the dark, for something so...
Not really a joke, but the honest truth that happened to me today..
But I think this customer was a Joke...
Me: hello customer, I've come to fix your machine
Them: thanks but can't let you in...
Just to keep people updateed (If you are interested)
Did try a new reversal assy, No good, lasred 4 pages
This issue was fixed by replacing the "Fixing/Feeding Lock Assy"
It sits at the...
If you are on about the new "Groved" feed roller (Groved as is like the pick up roller FB6-3405) its..
FC0-5080-000
BUT i have been told there is a HUGE stock of FC6-7083 in the UK, and until...
Got a bit of a strange one here that i would like to throw into the pan
Constant 2 sided PJs from all 4 cassettes, But single sided is fine
The device jams always at PS26 (Duplex tray) from all...
"Each morning, my e-copy scan station PC is always switch off, but we always leave it on"
"hummmmmmmmm... Okay":confused:
On Arrival, the cleaner had unplugged the ecopy PC and plugged in her...
To prevent this happening, ALWAY update the firmware to the latest version BEFORE changing the Drums
I use to get this issue, and use to swap the chip over from the old drum to the new one
But have...
Having a look at the service and parts manual, the guts of this new device looks very similar to the Adv 72/92 engine
Also try changing the Really Board PCB (FM3-7935)
This once happened to me once, when a dealer engineer confessed that he had unplugged the ITB Assy, while the device was still switched on
Is this single sided or 2 sided jams
Could quite possible be the Delivery Reverse Drive assy
(The new assy has bearings now instead of the old bushings)
FM4-5138-010 - DELIVERY REVERSE DRIVE UNIT
Have you tried using the laser cleaning wand that's in fitted in the front door
Up may need to slide it in and out of the black laser
Always works for me
Has the device got the SMTP & email address installed in its settings
Also depending on some networks, that email address may need to have some authentication
(Ask the local network admin if this...
Hi
Is there a finisher installed on this device
If there is, i do believe that the white drive roller (Next the the flag sensor on the exit) Should NOT be there
Remove that white roller and see...
I did notice that you have Not got an email set up on the device..
The device will need its own email address to you know where it came from
ie..
canoncopier@companyname.com
Try that as well
ULM can be set to use your AD as well as being set up for a local database
The user (will have to log on either via a PIN code/ Username & Password or the users swipe card.
If used with AD, ULM...
An Update on this problem
Went and cleaned and reseated all the sub PCB also replaced then DIMM and added another one
And a day later i was back again
So replaced the Main Controller with another...
Try using the ADF Base Complete (Well all apart from the tray and the open/close cover)
Comes complete with hinges
FM4-5330 - ADF BASE ASSEMBLY
Hi All again
(Been a while since i was here last)
We have a iRC3580 with a J1 Fiery on it, and the end user are using Mac's & PC's
We are getting a lot of Error E747-8000 from both platforms
...
Hi
My manager has asked me to remove the U1 Fiery from a 8105 due to it making the device to lock up
This customer also has a C1 and 4x iR ADV C5045 (With B1 Fireys)
These customer also has...
Thanks for that PDF:)
But I have already replaced them, (Did mention i had)
It's okay , I managed to get the correct part number now for the complete unit
Bingo, Now fixed :)