I have a couple of versant 2100 and 180 that the tray never says its empty
when you close the drawer with no paper in it it goes up
I have change one tray present sensor and it worked but I have...
Type: Posts; User: azehnali
I have a couple of versant 2100 and 180 that the tray never says its empty
when you close the drawer with no paper in it it goes up
I have change one tray present sensor and it worked but I have...
do you know what those steps are?
thanks
anyone know how to change a non metered machine toner to a metered toner
I guess you need a password generator?
I have two fierys for sale
I have a Xerox Versant 2100 that says replace waste toner bottle soon even with a new waste container
took the sensor out and cleaned it but no change
any ideas?
is it the same as any other model?
Is the Primelink B & W series toner same as Versants
do you mean they are good or bad?
if they are good which Chinese supplier did you buy from
I have tried Chinese parts before and they have been absolute junk so far
anyone know the nvm change for showing 13x18 when you have loaded 12x18 paper in the tray #3 or # 4
thanks
Does anyone know if the B9100 transfer belt is the same as the 4112?
Thanks
have you tried sending a pdf
I dont think in 36 years of doing this I have heard anyone send a tiff file
I have background on the entire sheet with white spots
the background is very slight
only visible on gloss stock
I have changed the BTR assembly and no change
anyone have any ideas
thanks
I will try the 13a I have on the C75 then
13 a is for the J75
its just I had the C75 software and never had the 700i so I assume it has to be for the C75
does anyone know if win764.1.1.1.07a is for the ex c75 fiery ?
the correct driver is loaded on the fiery
retrieve and install and test
does anyone know the nvm to change the toner status from always 100% to normal reading
thanks
what is the new nvm value and location?
thanks
do you get the error after you run one print?
describe exactly what happens
then change the ees board
how did this problem happe?
was hoping that was not the problem
I changed the on thats next to the ESS board and it did not fix
thanks
anyone have a solution for error 62-345 on xerox versant 180 ?
thanks
I am talking about independent companies or individuals
Xerox Technicians that work on C60 models and up ,specially Versants