You can turn it OFF, from paper trays settings --> expert adjustment -->
Double Feed Detection: Detect, Not Detect
Type: Posts; User: Koniska
You can turn it OFF, from paper trays settings --> expert adjustment -->
Double Feed Detection: Detect, Not Detect
Hi,
Do you use EF104?
If not, try to set off double feed detection..
Hi,
Check the conveyance clutch/1 CL13 and also all ADU clutches
This adjustment is valid when pf-705(scanner) installed
Check the gate after fuser. The gate with solenoid do not open fast enough and paper corner folds down.
Clean and adjust solenoid.
Hi!
Any ideas to SMB scan problem for IC408 controller.
I tried crosscable connection, but no luck