If (and thats a big if) you can get the developers/starters you can fill them back up and force stabilization. Problem is the units are chipped for life and will need to be reset.
Regardless, if the...
Type: Posts; User: kronical
If (and thats a big if) you can get the developers/starters you can fill them back up and force stabilization. Problem is the units are chipped for life and will need to be reset.
Regardless, if the...
In the driver properties, the tab directly after Configure is Settings. On this tab there is a checkbox "Popup authentication dialog when printing" - check it.
I have just confirmed this with the...
If you are trying to access this outside of the network the machine you are connecting to is on, you need to set up a static route, or port forwarding, on the main router or firewall to direct the...
No there is no ability to browse the network on this machine, at least if there is, it is not apparent.
Thanks for speedy reply. There is no wireless here so that wont be it. And what you are describing is due to a duplicate dns entry for the laptop being connected via wireless and hardwired.
Yes crossover to test as mentioned. If all ok then issue is on network. Either corrupt job stuck in queue (may work breifly once rebooted until the culprit job in queue resends) or if showing offline...
Ok, how do you know this? And can you explain why it works sometimes and calibrates perfectly, works for hours, then is suddenly 'out of calibration'? Sounds to me like the calibration offsets that...
See this kind of thing all the time. Make sure you have toner in the machine. Warming Up is a generic 'please wait' message and also appears when adding toner. Even though it is not specifically...
Do yourself a favor and REPLACE the imaging unit. Dont rebuild. Problem is most likely with the developer, or you have a bias problem. If new IU does not correct the problem you need to check and...
In other words, exactly what Mr Spock told you.
Hey guys, got a weird one that needs some special attention.
Cust has a bizhub 750 and is trying to set up smb scanning directly to workstation shares. Here is where it gets weird.
Setting up the...
Yes, and they may get a visit from some authoritative institution.
Jams, with a grinding noise?
Make sure the machine shows the correct size and orientation. Sounds like a size mismatch jam.
I have actually been having the same problem with a 5501. Once a week for the past 3 months now I have been called out for jamming only to find the bypass sep roller completely shredded and in pieces...
You HAVE to have a gateway. The gateway is the network's path to the outside world.
You also MUST set the DNS servers or else domain names such as Google will not work.
Sorry to say, but this is incorrect. Windows 7 works just fine with even the old ISW tools. The problem here is that the ISW tool does not contain a 64-bit USB driver for the 64-bit OS. You...
IF you are a tech, and have the service manual, open it. In the bookmarks the first item is called "Short List". Open it, and click on Adjustment list. Follow it.
Do you have this machine connected on a network? I have hundreds of these boxes and this is pretty common, when the machine is set for DHCP it will sit at this screen for sometimes up to 30 minutes...
Way to throw your 2 cents in without actually reading the OP.
There are no Sims on these, just straight up service mode. Check and adjust your scan area and ADF size sensors.
Ya know, you COULD try KONICA MINOLTA Global since, ya know, they made the thing.
8.5x11 feeds long edge first, and comes out fine... 8.5x13 can only be fed short edge. Make sure you specify under Original Settings the correct orientation and binding direction of the original.
No, it's not supposed to be a myth, but look at the world today. Common sense certainly has become mythical.
POINT.
Looks like someone forgot to use their common sense before opening their mouth about common sense...
You answered your own question. Newer MAC releases uses a new protocol based off of SMB, but is not at all SMB. Bizhub feature requires standard SMB. Thus, since newer MACs dont use SMB, its not...