From my experience, these fusers often have a problem with inadequate or uneven fuser pressure. You are relying on those two little pressure springs to do all the work. Sharp doesn't provide for...
Type: Posts; User: yurisan
From my experience, these fusers often have a problem with inadequate or uneven fuser pressure. You are relying on those two little pressure springs to do all the work. Sharp doesn't provide for...
Thanks, I am assuming it is already using Port 9100, raw, but switching to PCL5 is well worth trying. I will update with the results. And you wonder why people gravitate back to HP. So many IT...
Docs printing from Adobe Reader. No images on the docs - just text, the 11 page which was taking 3 minutes for each set (customer was printing 10 sets) was under 300K file size. Printing from Win 10....
I am seeing this problem on M3540idn, P3045dn (models we sold of this era) - one day a 15 page PDF prints in like 30 seconds, and the same document might take 3 minutes or more to print the following...
If something can corrupt you, you're corrupted already. — Bob Marley, 1945-1981
I consulted KMBS on this issue of obtaining and maintaining good TCR levels on these machines = C3320i and C3300i. You absolutely need to remove the IU's prior to startup, shake them side to side to...
I tried this and it did alter some of the image registration, but my sub-scan reduction problem still remained. "Something is rotten in the State of Denmark", as Hamlet famously said, but don't know...
Sim 50-10 only affects the prints and this unit prints perfectly, edge to edge, good color, good monochrome, correct registration & voids. As I wrote, Sim 48, which will adjust that sub-scan...
Did a "Initialize private data/data in machine" to get back an image that was readable. Problem now is that both OC mode and Side 1 thru SPF are reducing the image in sub-scan direction considerably...
Got called in to a non-functioning Sharp MX-3071 by new customer. Had no display, and only the power button above display & blue light to left of display lit. Figured bad MFPC PWB, right? Especially...
Looked it up - MX-2314 may be Euro version of the MX-2310 that was sold in North America. Ours doesn't have built-in PCL6, kinda like that scarecrow that needs a brain. Uses a special driver. Got...
Do you mean Sharp MX-M314N? Same SD card data as MX-M264N - I have that file.
Yes, you were correct in diagnosing this problem, and thank you! I adjusted the fuser entrance guide plate a bit lower. As a rule, I have needed to lower these fuser entrance guide plates to achieve...
Got a fairly new, low meter (less than 20K total pages) MX-3070V that all of a sudden started jamming in duplex print mode. Based on another post, I decided to swap out the complete side door, and...
Thanks for the suggestions - they are good ones. As you may have encountered, people are being switched from 2.4 WiFi to 5, and even 6. Most of the Sharps w/ WiFi won't recognize 5 & 6. On a side...
Lately, best deal for us has been the TP-link TL-WA801ND. We have been picking them up for $15-$20, open box, and they work great. Most important of all, they can be used in multiple roles, including...
Had exactly this issue with an A4 color MFP. And yes, it is a built-in security measure (according to tech support) that has to do with unauthorized reproduction of financial documents, including...
Has anyone been successful in performing a transplant - swapping SPFs from the monochrome machines that had this SPF (MX-M365N/M465N/M565N) to the color machines of this era (MX-4111N/4141N/5141N)...
Been around and about w/ Google about sending emails from a machine, and they insist that the only reliable service is setting up SMTP relay service thru smtp-relay.gmail.com, being sure to use...
We have another one giving us the Load Cassette 1 message, a P6035cdn, and we stretched out the spring a little bit. Now it wants to multi-sheet feed from time to time. And yes, someone's caution...
It updates the regular firmware OK using this normal method as you described (power off, insert USB drive, power back on), but the wireless card does NOT get updated - tried by adding the IB-51 file...
Anybody know how to update the firmware of a IB-51 wireless card? I am working with a M6535cidn that needs this NIC to be ver. 2.3.0 in order to support SSL/TLS ver 1.2 Downloaded the firmware, but...
Turned out to be a bad CF card - wasn't making its memory available. The clue was the inability to update/renew the firmware - got a failure when you got to the writing phase in firmware update....
When attempting to scan to folder, the process fails and error report claims "System error occurred" due to "9000" result (insufficient memory). Scan to email gives same result. Webpage is accessible...
Good to know. As I suspected - a quirk in the firmware programming/programmers. I mostly know Sharp, and they would never program something so counter-intuitive. Their programming is more adaptive &...