Hi Guys.
I have a ira5535 with the above error. The machine has been running perfectly for the last two years when the customer phoned me and said they cant get the last inch or so of the Cyan toner...
Type: Posts; User: Kings
Hi Guys.
I have a ira5535 with the above error. The machine has been running perfectly for the last two years when the customer phoned me and said they cant get the last inch or so of the Cyan toner...
This has been changed twice now due to the gears broken. The forst one lasted a couple of weeks and then broke.
The toner in the cleaner unit is going solid in places and causing the feedscrew to...
Hi All
I have a IR6075 that is i think dumping waste toner onto the guide that is just after the ETB.
I have had in the past on this machine, gears broken in the waste toner drive assembly and also...
Hi all
I am a Canon copier engineer sadly working on a Samung C430w printer.
Fitted new fuser and transfer belt and I want to reset the service life counter.
Any ideas on how to do this. Is it...
Hi All,
I require the parts catalog for the Oki MC860 optional paper tray.
The shaft that holds the paper feed roller has snapped and I am trying to get that part number.
Any help would be...
Hi All,
I need to get the part number for the optional 2nd tray feed roller retainer. Its the roller holder that lifts up and down.
I've tried to get one from the web with no success.
Any help...
I've also had this a few times and if it hasn't been the grounding contact inside the drum it has always been the HV board..
Good luck
Hi All
I am having trouble with this machine saying Paper Mismatch. There is A4 in the tray and it is showing A4 on the control panel.
It only does this in printing mode ( copying in ok). The print...
You say it only does it when doing face down copies, the trouble i'm having is when doing face up as well.
The bushings on the door are clean. Do the bushings in the delivery drive unit get gummed...
Hi Etech50
Im not sure if it is due to strain on the motor, because when it is running and can get a copy through it, if you put quite a bit of strain on the exit rollers it still passes a copy....
The exit sensor PS36 is clean also the fuser sensors are clean and all sensor arms return fast and smooth.
Was looking at the delivery motor assembly and was thinking it looks a bit of a pain to...
Hi All,
I have a 6075 out in the field. Its started giving jams at exit. Jam code 0213 Stationary jams at PS36.
On doing a single or double sided copy, I found that intermittently the exit...
Ok Dan,
Thanks for your input.
Was going back with the new hopper and original toner.
Trouble is that I sold them the Katun toner. I might have to swap them back to original toner.
Ill see what...
Have this machine with this error.
Toner feed motor M17 over current sensing.
I have gone into service mode and done a motor check and the error comes up every time and it sounds and looks like the...
This is what the manual says.
Hope it helps
E520 0001
Title Shift Motor (M4) error
Description The shift roller does not leave the shift roller home position
when the Shift Motor (M4) has...
Hmmm as I thought.
Have already ordered the drive assembly and waiting for it to come in.
Not looking forward to this job.
Thanks for confirming my thoughts with the replies guys.
Hi all
I have a customer with a IRAC2025i. On start up there is a very loud clicking noise from the fuser unit.
It sounds like the fuser drive gears are jumping. On inspection I noticed the plastic...
Hi all,
Ive got a couple of customers that have irc2380s and they've upgraded to Win 10. I got them printing but can't register an address for send. When using SMB I get as far as the User and...
Thanks skynet I will check it out.
Not sure if waste toner build up is enough to wear the black drum.
Did you find the flag on the end of the WT screw broken.
Hi guys,
I have one of these in the field that keeps giving a 2 inch faint band at the front edge running in feed direction ( black only ) Colours are fine. Looking at the black drum, you can...
Thanks for the reply.
I think this driver has already been tried by the IT company.
I will get them to try it again and hopefully you are correct.
Much appreciated.
Hi all,I have sold to a customer of mine a Canon IR2545i. They are using Windows small business server 2011. I cant find a driver to download from the Canon site.Various drivers have been installed...
Hi All
I need to know what the equivalent manufacture and model is for this as I need to order
the cassette retard roller and the paper pick up roller.
It looks very Samsungy to me.
Anyone...
Hi All,
I've got a customer with a FS5400 that is giving faint black streaks after about 5 prints on a run.
There is no repeating pattern to them. Fuser looks good and as there is no repeat to...
Thanks Mate
that's the information I needed....Great stuff