Great company in a great part of the country.
Private Message me if interested.
Type: Posts; User: trektech
Great company in a great part of the country.
Private Message me if interested.
I don't think you can or should.
That is about where I left it back then. I proved the Bizhub works and that the issue was with the network to the owners and left it up to the IT guy who is an independent outside provider. I tried...
* Update *
I found the reset for the transfer belt unit!
I returned to the site this morning with a pocket full of pico fuses determined to discover and reset this belt unit. I began looking...
Yes, that is the first reaction and what will probably need to be done but, I would like to know why it did not reset first.
I got some earlier info. about the white flag actuator but as I review...
Thanks WildBill,There is a fuse?? I thought it was the white "flag" actuator that tripped the switch actuator in the printer.I tried resetting that several times to no avail. If there is a fuse then...
Hi,
Hope somebody has an answer for me on this one.
Simple call to install user consumables that they were not comfortable with.
Transfer kit and fuser, no big deal right?
After replacing the...
Parting out Xerox WC M24.
Complete top, scanner and feeder available for sale.
Scanner stand too if wanted.
Reply or PM me with an offer.
Do you mean to say that the test prints are solid filled with a color?
Or are the solid fill test prints displaying poor print quality?
If the latter is the case then it depends on what the image...
Hey thanks,
I did resolve the need for a fuser back then but have held onto the core in hopes of finding parts to rebuild.
Do you mean to say you have a fuser or the pressure roller?
In either...
Thanks Zed!
Finally got it reset but thought I'd share something I found.
This account is all Macintosh. I had to download the SOM as it is separate or not accessible though the Mac PPD. Only the...
:confused: A customer has one of these little printers and after a power failure the web monitor reports an SC542
error. With only a Start/Stop button and a Reset Button on the printer, I have no...
Fusers are on back order from my sources.
i know there has been threads on this before but I would like to ask if anyone out there has a pressure roller for this machine or know where to get a fuser...
I'm not sure why you may have had a misfeed error.
Jumping the old fuse with the new one should work in theory but I always remove and replace so I have no experience with leaving the old in. Maybe...
Yes, I know. Im not sure what the actual rating may be but have noticed for the KMBS and Xerox reset
Fuses that as long as it is a fast acting xxxMA fuse, it seems to do the trick.
Yep, those will work.
Thanks Seansbar, looks like a good number. Don't know why I couldn't see it my self.At least I always know I can count on the good people on Copytechnet to be my sometimes needed extra set of eyes...
Looking for paper feed rollers only. 3 each tray. Also tray 1 feed roll.In my manual these are not spared and one must buy assembly to get.Any cross reference info. Will be appreciated.Called The...
Off the wall question, hope someone can provide some insight.
I took a lower tray deck from a dead WC M24 and put a Phaser 7750 on it thinking they were exactly the same.
The 7750 recognizes the...
Replace all the barrel capacitors on the power supply board.
I got this tip from someone several years ago in reply to a question about bad output from scanning originals and it works for dead...
Finally got around to getting and installing the Ricoh motor and am happy to report success!
Thanks for a great reply and suggestion. It is much appreciated.
I should have tried that before I sent it out.
I did consider it.
I assume you have had success with this before.
No, won't come to ready. Goes into CA1 during warm up. Actually, a little after I hear the laser spin up.
The machine is in the shop. I can create a local connection but do not know about the...
That's what I was afraid of. I had a suspicion that was going to difficult to find.
The laser unit works sort of in a Xerox WCP 416 (basically the same machine) with occasional error codes thrown...
I had a customer with similar situation but it occured a little more frequently than once a year.
After some error condition studying in the manual and a jet direct replacement, I decided that the...