Hello
I am looking for help in finding the install manual for an FS-612. Specifically, which wires plug in to RU-509. I know what it's like to make the wrong choice on that and I can't find the...
Type: Posts; User: Beachguy
Hello
I am looking for help in finding the install manual for an FS-612. Specifically, which wires plug in to RU-509. I know what it's like to make the wrong choice on that and I can't find the...
Hello, I'll respond to this to you via PM.
I'm looking after an older KM-8530 that has consistent issues with copy quality. Basically the print gets dark black lines on it which point to the cleaner blade failing. I've replaced and/or cleaned...
Thanks for the last post, but I just want to clarify that the system is working between the Imagepass and the Printer i.e, I can send test pages to from the M1 to the printer. The problem is that...
Yes I'm using a standard TCP/IP port. I can ping to the M1 no problem. I just did the normal printer installation and I used Print Driver I used was PSv201WXP.exe from the Canon website, though I...
I have a Canon IR8500 that is using an Imagepass M1 controller. The ImagePass communicates with the printer with no problems. The issue is I have is printing to it from the PC. I can ping to the...
I don't think I'm the first person to ask for this but I'm looking for a Canon IR 5070 Service and Parts Manual. Checked the pay sites but no luck.
Thanks
Thanks for the replies guys, we did the transfer checks and everything seems OK. We're suspecting the developer unit but we don't have another developer unit to try and quite honestly the we need the...
I have a copy quality problem with an IR8500 where white dots or voids are showing up against a halftone and to a lesser extent on solid black. It is always on the lead edge and roughly in the same...
Yeah, when the Print or Scan buttons are selected, nothing happens, right now it just works as a copier. Is re-installing the firmware something I need the OEM for?
Here's a follow up to this thread...Unfortunately it's gone from bad to worse. The IP-921 controller does not appear to be working at all. It has two red lights showing, on the top left and lower...
Thanks for the replies. Yeah, I've used the Command Workstation on Xerox machines, it's something I can try. This printer has the IP-921 embedded controller. I can delete the jobs that in the printer...
We have a strange problem with an 8050. It's recogized by the network (passes the ping test) but it will not print when a page is sent to it. On the queue it will say Printing-Printer Busy or Error....
Give Sara a call, she's not busy:)
I keep getting this code periodically. I know how to reset it but I was wondering if anybody had any ideas on why it keeps coming back. (usually about once a month).
Thanks
Hello, I looking for a Parts Manual for a Canon 5065/5075 if anybody can help. Thanks
While changing an upper fuser roller in a Colorforce 8050, I noticed that it didn't have a fuser cleaning web. Is this normal practice or was it an oversight?
I'm getting a large skew on two out of three trays on a KM-8530. Tray 2 is fine, but usung the other trays causes a very discernable skew. I've tried the electronic adjsutment for registration and...
Thanks Kyoceradude, that fixed the greying out problem, much appreciated. Unfortunately it now seems we have a lift motor problem on the same tray, but at least the printer knows it's there now. And...
Have two machines, each with a strange problem, both involving feed trays. On one machine, Tray 1 is greyed out on the status panel. Have tried rebooting and swapping feed trays, but it just doesn't...
Yes two of the four light up. The top left and the bottom right.
The printer is supposed to be a Printer/Scanner/Copier but it it thinks that it is only a copier. Also it is not recognized on the network. i.e. you can't ping to it.
It looks like the machine we have has a bad IP 921 controller. I know these are embedded in the printer (Coloforce 8050), but can they be bought as a seperate unit? If so how much and does anybody...
O.K. here's the latest we've found so far. Of the four red LED's arranged in a square, two are on: the top left and the bottom right. There is a green LED right below that which is on all the time....
The controller is an IP-921 and there were two geen LED'S: one flashing and one solid. There were also red LED'S and they all appeared to be on. I'm going by memory here so I'll confirm that when I'm...