Search:

But then my boss will know I'm working. Just kidding. Good idea really. I'll give that a try. Thanks!

I have a Sharp AR-M257 scanning to email. In the copier web page there is a spot under network for enabling BCC and adding an email address. The customer supects theft and fraud is going on in one of...

Thanks Guys,
Getting the RSP file from Ricoh was no problem. I just called Ricoh tech support, they needed the serial from license manager and emailed the RSP to me. The uninstall and install sounds...

How do I upgrade from Ricoh Plotbase 3.7.1 to 3.7.1sp4? My customer switched to autocad 2010, this requires the upgrade. I have the RSP file from Ricoh. I have downloaded 3.7.1sp4 from Ricoh. I have...

How do I upgrade from Ricoh Plotbase 3.7.1 to 3.7.1sp4? My customer switched to autocad 2010, this requires the upgrade. I have the RSP file from Ricoh. I have downloaded 3.7.1sp4 from Ricoh. I have...

Thanks, that's the ticket! It was the NCS Ricoh terminology that I forgot.

solid green. solid red. no amber. pings (ping aaa.bbb.ccc.ddd -t) for about a minute the looses connection. In the Sharp's you can reset the NIC, I just can't remember how to clear the NIC in a...

How do you reser the NIC on a Ricoh MPC2550SPF? Yes, my mind has gone blank. It has a solid green and solid red light. The customer lost 2 computer in a lightening strike. I know this is part of...

the large power connector has 5.5v. the small one has 3.3v. the hard drive spins up. the usbs have power. the engine does not appear to be starting up. no fuser noise.
Thank you

Hello,
I have a toshiba estudio 2500c with a dead consule. No lights. No hard button response. I just changed the hdd and firmware. everything worked fine for several days. then tested it just piror...

Scanning to the copiers hdd is to be able to print the same document over and over from the copiers hdd. Not having to run an original over the optics.

Yes, it must use the cat5 network connection for both.

Have you tried the XP PCL5c driver on the 7 OS. Assuming your 7 is 32 bit. If not, try the XP 64 bit on the7 OS. I have been able to get an AR-BC320 to print from 7 this way. No 260's in my territory...

هل أنت في مصر؟

I need to replace a hard drive on a machine we took in on trade. To give the customer the original hdd back. It's a Toshiba e studio 2500c I am trying to get the frimware and directions to reprogram...

I traced the source of the fountain water while I was there last time. It comes from an outside swimming pool for guests. Uses a lift pump to take the water to the top of the fountain. Then gravity...

I got my loaner back. The selling dealer dealer delivered a new machine to the customer yesterday. We gave the dealer their machine back. This makes the second replacement (not including loaners)...

Thanks again, everyone. We are on the northern Gulf of mexico between talahhassee and mobile. This is hte only machine accting this wasy. All it does now is shoot blank papers. It will send faxes and...

Thanks everyone. That's pretty much what I was thinking. Spent 6 hours Friday cleaning, adjusting and anything else I could think of. Still just blank paper. No residual image on the drums. Laser is...

Hello,
I have an MX_3100N that has corosion on nearly all electrical contacts (dv units to boards), shafts, balancers, motors, clutches and hinges. It only has about 40,000 copies. This machine is...

I had the same problem on Friday with an MP 9001. There is a TSB that might apply. rfg040429,

SYMPTOM:

A SC542 or SC555 occurs.

CAUSES:

• Temperature misdetection has occurred by the...