There was one code in color machine that needed fuse to get to "level 2 reset". I suppose this one could be the same but have not yet run across needing it. A good reason to hang on to fuses in case...
Type: Posts; User: Coptech
There was one code in color machine that needed fuse to get to "level 2 reset". I suppose this one could be the same but have not yet run across needing it. A good reason to hang on to fuses in case...
No. it does not go where the jumper is. It goes on the other connector. If you check the service manual on replacing the fusing film, it tells you which pins and which connector it goes in. If you...
Not so much in the states...Use the series numbers more than series names.
Not used to the series names but the model that has been the claw squeaker in my experience is the little black and white 305+.If the thread was about the little color C305, I apologize.
usually just the claws squeaking. put a touch of silicon oil on the tips and it rarely comes back. Not so much oil that it goes on copies. Just enough to stop the squeak.
Another dated joke that was Challenger related was what do NASA and a walrus have in common? Both are trying to find a good tight seal.
This will give away my age but I remember when Delta airlines was crashing every time you turned around... My favorite joke at that time was Delta was offering a 25% discount on airfare if you...
In the training, it shows published life expectancy under 200K. They get put in places where people run much more than that on them.
A Billionaire is dying and wants to try and see if he can take some money with him to the great beyond. He gathers his doctor, his priest, and his lawyer and gives them each a billion dollars to...
A one way in the lever that rotates the reverse roller, One in the sep roller gear behind the torque limiter, and one in the black gear also on the drive. Feed assembly has two screws towards the...
I assumed that you were a tech and had some experience servicing this copier. I am hesitant to give too much information as I can potentially cause you more harm than good if you start tearing your...
Replace the feed rollers but you may also need to disassemble the feed units enough to clean the one-way bearings within them in different locations. There was an old bulletin about a longer bushing...
It will only print test pages from tray one and also only if paper type is normal. Paper set to anything differently, and it will fail to print calibration pages.
After you atart rebuilding the unit for exchange, Go into the end of the 3000 sp settings to manual new unit set and set all the appropriate items that have been replaced to a 1 before turning...
Looks like it is pulling developer to me...Can you feel the "grit"?
No J149 mentioned in VR52 service manual. Again, I would check the jam code in the main body service manual for whatever model it is attatched to.
It has been several years but I seem to recall the jams in the GBC accessories had a different prefix than the J that began the main body jams. If I am wrong, it wouldn't be the first time. What does...
Seems to me you got your order all wrong. I would let them chop the wood, dig the holes, fix dinner and the rest of it before shooting them. Don't do the shooting competition first!
Not to make light of anything but could not pass on the humor of this. An IUD is an intr-uterine device to prevent pregnancy. an IED is an Improvised Explosive Device... So which one blew up and...
I think in the system settings, there is a reset SOP to factory defaults button that is way to easy to access that removes the classic applications. My bet is the IT dept is causing your issue not...
Go into factory mode and look at 5081. If I remember correctly, that is where the new code is set.
Apply that logic the other direction and pass a law that everybody has to buy a production print machine. If you have a small office and only want a desktop, you get fined for not buying a production...
We are never going to agree on this and that is OK. We had different experiences with the system. I never understood the reasoning behind my being penalized for not buying a product when I was not a...
Helping millions of Americans? That is a stat with no backup. There may be millions on the plan but that does not mean it benefits them. We made it therough our period of rolling the dice...Meanwhile...
Your entire list benefits the minority at the expense of the majority. The healthcare system is broken. The Health Insurance industry is also broken and criminal. Our legal system is badly broken but...