My setup is C7000 with FS-531 an LU-202 + IC431, dipsw 65-1 is ON.
I'm trying to find a way to bypass the prohibition to printing large sheets paper to the main tray.
Sheet size is 330x487.
...
Type: Posts; User: Jett
My setup is C7000 with FS-531 an LU-202 + IC431, dipsw 65-1 is ON.
I'm trying to find a way to bypass the prohibition to printing large sheets paper to the main tray.
Sheet size is 330x487.
...
Good day!
I have some memory issues with a di850 and rarely with a di750.
My KM contact said that there is no chance to get original replacement RAM since it's a very old model.
Does anyone...
We may be on the brink of establishing the official copier tech sport: toner bottle throwing - fastest spinning and longest distance wins. :cool:
But anyway - does precisionroller treat everyone...
I am quite sure this is not the case for the TN910 (Bizhub 920). Cartridge is the same and there is no chip.
my 2 cents:
Burned toner with aceton, if it really nasty then Super Kromofag (paint stripper)
For rubber stuff there is Protegum, better than anything I used.
General stuff with window cleaner or...
According to precisionroller the genuine TN910 that is sold in the US is not the same as the genuine TN910 sold in Europe.
I was like WTF ?!
14471
Hi!
Well, I've been twisting my mind over this one for a few days now and can't figure it out.
I've got a 7145 that usually starts up, makes a few very light copies, then dies with 26-1 or rarely...
Sorry, this is an old problem with the machine, so I forgot some details that I checked but didn't mention.
I did do a stop check before and the problem was after the drum but before the paper...
Hi.
I have a weird problem with a di750.
Any text (or graphics) that is between 15 and 15.7 cm gets smudged a little.
It's a vertical line, and it's independent of tray and paper size and it's...
We have the same problem, only solution would be to buy a fiery.
My KM tech acquittance says that it will have the transfer/processing speed close to a C450 without a fiery.
Anyone got an idea about the manufacturer and model ?
Doesn't look like a Konica Minolta.
Found this picture on the net a few days ago and I was wandering, was an engineer really bored, may it be a custom hack or simply a photoshop ?
8397
Anyway it's worth a laugh :D
I'm an "end user technician". Got "promoted" from all around IT guy about a year and a half ago, because "we" started a low budget copy shop for (mainly) students.
I do 95% of the servicing (and...
OK, so here are 2 stories I got.
First is from the regional KM tech guy we work with.
A copy shop was reported to the consumer protection because they "refused to print white" on color paper....
OK, so I've taken the whole thing apart, down to the toner supply unit. Cleaned everything in sight.
Found one of the problems that is possibly the cause of the gray output: in the drum unit/toner...
Thanks, will give it a try tomorrow.
Hi.
I have a problem with a Konica 7145 machine.
The developer was changed a few months ago (usage about 20000 pages).
All pages come out gray.
Tried giving L detect to see whats up, gives me...
I've got an F28-3 error on a KM7145 and I can't seem to get my head around this.
btw changed developer recently
Thanks
Jett
An old post but I have related question.
Is there any chance to set up a di750 and a 7075 in tandem mode with an IP601M controller?
Even if I already know that the machines need the exact same...
I had a feeling I would a similar response :)
I'll ask a very stupid question: do the color series (C350) have this problem too ?
Interesting piece of info, but it isn't related to the project, since community names are like (dunno) folders on a pc when you try to access them from a command line: you know the name or you are...
On a related note, does anyone know a way to set an SNMP trap in 7145/IP-432 ?
Thanks, well, I'll stick with Coptech's recommendation.
Somewhat related question, does anyone know where can I get the MIB files, for KM machines ?
Hi.
I guess a few of you guys experimented with basic SNMP stuff.
Does anyone know where can I find the MIB files for Konica machines ?
From an SNMP walker I got the value "Konica MIB v1.3.2" at...