Search:

I verified SP 5-985 set it to 1, there's only system sp under service mode. Thank you.

Hard drive is still present in machine. Thank you.

Thank you for the confirmation. There are no option in User Tools or SP mode.

Hello everyone, we have Ricoh 3053, 3054 with no print/scan option. I believe these do not need sd to enable function. We reset, update firmware still no luck.
Has anyone seen this. Thank you.

Hello. I am having the same issue. The Led light on the formatter indicates the formatter. We're you able to fix this with a hard drive or formatter?

Thank you. My apologize it's 6508a. I will check the height. Last time I actually lowered it. I will raise it this time. Thanks again.

Any one experience ADF rabbit earing on these models. I have two on the field with same issue. It's intermittant and cannot figure out. Thank you for the help.

I have a toshiba E456 stuck on checking system. I Replaced the "wipe" hard drive not the regular sata. Format drive, format admin password. Update firmware went through. Cannot
get into mode 08...

Hello everyone. Our Canon hard drive took a poop. We have another one but it's impossible to clones these. Does anyone would like to sell us the firmware. I have the SST already but no firmware....

Thank you. I will try that.

Hello all, we have one of these at the field. I am able to print and access the web interface. The display shows only Samsung logo and never to goes to ready. I don't have the admin password so I...

Thank you for your help. Yes it is the black plastic bushing on the optics itself. It was so small I missed it.

Thank you everyone. I will give those a try.

[tach]3577235773hello all, the bottom of the copy is darker when i make copy from the glass. The left picture is black and white, the right one is color copy. Any help would be great. Thank you.

can anyone verify ricoh mpc5000 black drum d0292250 will properly work with ricoh mpc4502 just by shaving off connector. I only see forum with changing it to color but
how about from black drum to...

Thank you.

Hello All, does anyone know how to get into service mode for a Konica 4000P to reset the maintenance count. Thanks in advance.

IT'S BEEN BEEN A WHILE i DON'T HAVE A MANUAL ANYMORE. You need to also check that the solenoid is working as well.
34065This may be it. You will need to double check.

Thank you. Teckat.

Hello everyone. I need a Canon IR 7095 for training purposes, but they are very expensive. Does anyone know of an older Canon machine that is mechanically similiar to the 7095.
Thank you for your...

Thank you Munster. The fuser was the first thing I replaced. It happens when you first turn it on. Single sided copies is fine. Only when i duplex when it makes that noise. Also no jamming...

Hello, anyone had a thunking noise coming from the right side when machines first turns on or when duplexing. Thanks in advance.

I had to replace the pickup roller clutch.

Pretty straight forward. I've done it on a TA 300ci. Make sure your scan to network is working first. Then check the fax foward to on, forward to your network folder you created. Let me see if I...

Not sure if that is possible. I'm assuming the other documents are to small to use the document feeder. I believe you may have to use adobe professional to merge the two documents as one file.