Is the contact on the transfer unit good?
I remember there was an old bulletin on the Aficio650, right on the copper contact.
Type: Posts; User: rapper
Is the contact on the transfer unit good?
I remember there was an old bulletin on the Aficio650, right on the copper contact.
But the carriage motor turns?
Inviato dal mio GT-I9301I utilizzando Tapatalk
The 86:01 is a mechanical code.
Inviato dal mio GT-I9301I utilizzando Tapatalk
Excluding electrical problems that are not easily seen, so I solved the mechanical problems (86:01).
I removed the cutting wheel, I lubricated with gun oil the carriage of steel, I checked the...
Oil for guns
Inviato dal mio GT-I9301I utilizzando Tapatalk
It's the carriage well lubricated? With fine oil type foe guns
Inviato dal mio GT-I9301I utilizzando Tapatalk
unfortunately the whole group transfer belt.
Then look at the contact springs bias and pcu that are on the machine. I have found them bent and discharged to ground
The problem occurs randomly (at least that's what I think) because sometimes prints with good color nice and clean (original oem toner ricoh), then the drum starts to get dirty and the charging...
in my cl7300 the PCU / drum is full of toner (cyan, magenta) : the drum and the charging roller are full of toner.
And consumes too much toner. (black and c,m,y)
The transfer belt is clean,...
thanks, I'm an engineer ricoh in Italy. Wondering why some files are printed with colors mixed and not clear
dark images, full color magenta, very mellow.
anyone have any ideas?