Has anyone tried a Lexmark C540X75G waste container in a Sharp mxc357f and does it work?
Thanks
Steve
Type: Posts; User: Lbcoaster
Has anyone tried a Lexmark C540X75G waste container in a Sharp mxc357f and does it work?
Thanks
Steve
This gen does not have the SD card like the next generation
Going to try MFP board from a 283 if I am reading the manual right they appear to be the same may have to change the eprrom
any help...
Sharp MX 453 When you do a 2 to 2 or 2 to 1 duplex it get stuck in job status saying Waiting
Things we have tried:
Duplex is not disabled
Replaced CIS for second side
Replaced Doc Feeder...
I would have to say something in the optics, clean all mirrors, remove lens cover and clean both sides of the lens, and front of CCD my 2 cents
You may want Sim 26-6 Used to print information on various settings, adjustments, counters, controls, and versions.
Thanks I will give it a try!
Thanks I will try that which one?
I don't think it is the SD Card on the Doc feeder might be the SD on the Scanner control PWB or the Dimm 1, 2 or 3?
Thanks
Steve
http://www.copytechnet.com/forums/images/icons/icon8.png Sharp MX453 Stuck in Waiting when duplexing!!!
Sharp MX 453 When you do a 2 to 2 or 2 to 1 duplex it get stuck in job status saying Waiting
...
Sharp MX 453 When you do a 2 to 2 or 2 to 1 duplex it get stuck in job status saying Waiting
Things we have tried:
Duplex is not disabled
Replaced CIS for second side
Replaced Doc Feeder...
Yes, took it to the shop not connected when i put in a blank thumb drive it starts to go into set up then hangs in initialization this unit uses a thumb drive as the hard drive
if you find how to let me know Thanks
No I was not able to solve short of buying the thumb drive from Xerox. Steve
That Would be great,
Here you go...
https://www.dropbox.com/home/Xerox%20Flash%20Drive
Thank you,
Steve
Great thank you I will follow up!
When putting back the original flash drive it once again gets stuck in initialization
Thanks!
I did put in a blank flash drive and it did come out of initialization and looks like it whats you to start the set up but then it goes into a loop and repeats this...?/
Yes and I believe it's a problem with the software on that flash drive do you have access to the software or can direct me where I can download it
I am unable to access the machine via the...
understood, sold them a HP unit that will work well for what they do.
Most of what I was trying to do was to see if I can easy fix for my tech ego and use as a loaner if needed...
thanks
[QUOTE=prismtech;557974]Start with the firmware drive.
is there a way to flash the firmware, I am unable to do an update through the web page it will not go past the initializing
Thank you ...
No ideas?
Steve
Hello, I have a Xerox WC3325 stuck in initialization, it turns on but stays in the initializing state, got it to pass that stage one time entered web page updated firmware it was stuck in that for...
Hi, looking for a drum for the Sharp AR 336
Any help will be appreciated.
Steve
Lbcoaster@aol.com
Thank you for your reply, what appears to have happened is the heading position had been changed internally which made the paper feed 2 recording papers to get everything on the paper. When do you...
Got a customer that is complaining that their UF 8200 is putting out blank pages. Was out once could not duplicate problem but from customers description sounds more like double feeding 2 pages at...
Thank for the assist...