Do you see? You all need to re-evaluate.There was no Trump collusion. You watch way too much news which is bits and pieces of what they want you to hear. The truth is there is no better president at...
Type: Posts; User: yourownfree
Do you see? You all need to re-evaluate.There was no Trump collusion. You watch way too much news which is bits and pieces of what they want you to hear. The truth is there is no better president at...
thanks for the update. you got me beat im at 28 years
Phil I like your idea. will this also work for organic drums? In case Stern wants to use your method on other drums. I would be interested as well.
replace the transfer roller. Above techs are how I feel about it. if you fold your paper from one mark to the next you will see the diameter of the roller you are dealing with. There are way too many...
here is how to tell where your problem is:
open the lid to stop the print just past the drum and not into the fixing assy.
If it looks good its your fixing assy
if it still looks bad could be drum...
I cant see on the print what you are seeing.
Mostly with these machines its either the primary charge roller dirty, clean with window-glass cleaner until it looks new again. clean the the little led...
go to service select drum and press ok button twice. first is a "?" the second push means yes go ahead. Gives it a starting point for the drum refresh count
most likely get by without it too.
For me I set tray 1 for envelopes, customers computer to choose envelope. I think its going too fast through the fuser. The settings will make machine go slower and give it a bit more heat. The...
No, its all nonsense. Nasa says the polar ice caps are getting bigger not smaller. Isn't that one of the arguments? Also the magnetic poles are switching slowly , I dont think man has anything to do...
See this post, tells about how they resolved. maybe can do it without firmware
http://www.copytechnet.com/forums/canon/67170-ir2520-display-message-insert-drum.html
I dont recall now. it has been a few years. dont need to now. If i looked up the error again it might ring a bell if you need assistance on it.
It's happened to me a couple times with fairly new machines. ok one has 43k on it. That,s not a lot.
The belts can be a pain to replace if the black plastic slide wont slide because it hits the...
thanks. as it turns out it was 6000 not 66000. I replaced fuser and back in business. Thanks for the reply.
Kyocer FS-1370 dn.I am not finding this in the service manual. I got this number from customer and have yet to see this machine. Is this a fuser error? I see fuser errors in the 6000 list in the...
good point, genuine hp ink. I will start there. could have got a bad batch of third party ink.
Customer has tried new refurb ink units approved for government use. I replaced the trailing cable (new)and carriage assy with a used one, still cost me 100 dollars for the carriage unit I am...
thanks I will check sync thru
Customer has a name and phone number in their address book. When they use that name to send a fax and when they look in the recent tab they only see the phone number and not the name. They would...
got inbox cleaned a bit. Thanks to both Jim and KyoFan for the firmware. Kyo Fan had the the exact firmware which I was able to use to downgrade. Here is how you downgrade. Using KM netviewer from...
Thanks friend. I am guilty for not looking over the manual. No excuse. Sometimes we just get in a mode and dont take the time to read. Although I spent hours trying to figure out how to decompress...
Open clam shell pull out the plastic piece that is above the manual tray feed roller. The same piece you have to pull out to change the roller. Now push on the spring loaded jam release plastic...
Subaro is right. Did you fix the machine yet. It sounds like it is missing a color although I had one missing and it still goes through the calibration. Maybe the patch reader for the etb is not...
this model doesnt have a compact card cover. or use compact card. But I did find a way to downgrade. I thought I had the right version but I don't have. As it turns out the library of firmware I was...
I now have the correct firmware thank you for your responses. Here is the update. I received the eeproms overnight. Now these eeproms can also be purchased online. They are PIC chips. Here is the...
The machine is at a bank and several machines do work, only the ones with the specified firmware. The bank has several locations. I am in contact with Kyocera again for a resolve and I am going to...