Hi
I my father in law picked up a km-2050 recently, I have good xerox experience but no real kyocera....
print is OK but the copy leaving a 1 inch strip in across every page where there is...
Type: Posts; User: smith60gs
Hi
I my father in law picked up a km-2050 recently, I have good xerox experience but no real kyocera....
print is OK but the copy leaving a 1 inch strip in across every page where there is...
Ok loaded smtp diagnositics on a laptop, took over the ip addres and physical port, can send to smtp2go but only if i have auth enabled....
next step is to put wireshark on my POS canon (never had...
so i need an smtp host that does not require any authentication , please PM me if you can help here
i send v limited traffic. Peter
it is not the remote host , i have run smtp diagnostics, the remote end needs authentication, i enter and it works port 25
so its the scanner - reset it back to port 25
entered smtp addres...
hi
I have exactly the same issue with a IRC6870
I can ping the offsite pop/smtp host but cannot get the scan to email to function, continual #801 auth issues
have tried moving the outgoing...
hi
We moved a Canon IRC6870, on the journey across a paved carpark the copier got bounced around a bit. Powered on fine prints black page after page no problem, but on color print I am getting...
hi
what about the toner inside ? does the old toner cartridge need to be re chipped or can the copier be told to manually ignore chip?
thanks
Hi can a MPC3000 coper take a MPC2550s toner unit?
Hi
I have an Apeosport 550I, I have enabled all ports etc, Tried DHCP tried manual setting of IP etc nothing.... known good ethernet port, works fine with mac...
Anyone seen this before, ...
i managed to find service manual and have run the heater test i get the following reseult
R0 234.0208
R1 20.2667
R2 3148.2019
R3 -.3216
R4 -16.000
R5 20.2667
cheers mate will clean it up tonight, i owe u a beer where u based?
I have a ricoh 2238c that is leaving 3 dots of what looks like oil on the trailing edge of any paper going through, I get left with perfect half circles at the same spots but no marks anywhere on the...
hi can anyone shed some light on this error? thanks P
looks like these guys make replacement fuser rollers for some xerox units...... http://www.magnetone.com.sg/files/Product-Catalogue-Xerox.pdf
has anyone on here dealt with these guys
from...
ok swapped the rollers , all good 200 copies later, perfect copy nice 8)
Clearly the fuser units are different electrically (different operating temp voltage etc etc)
how much difference is there in the actual rollers inside the units.... looking at two units side...
ok now i feel like an idiot, was the fuser unit, so happens the one I was swapping out with for comparison had the same breakdowns....
Hi I am very new to this board, I have a FX 550i that is both printing and coping but there are two marks coming through on the pages, one is a half moon shape that is repeating regular across...
Hi
I was getting low fuser oil mesage so replaced that , and also message to replace toner bottles, swapped both for new ones, about a week later I am now getting SC300 error on a ricoh 3224c.
...