I am selling all Ricoh Aficio 2022 boards,
Let me know if you are interested
Type: Posts; User: banderas
I am selling all Ricoh Aficio 2022 boards,
Let me know if you are interested
I have to read read read
Re:ricoh 220
how dumb ... am I ... the af 220 doesnt have to be set up as an i/o device in scanrouter lite to work.... it works without this being set up
I have same problem,
did you find the solution?
ty
banderas
Thank you
Any luck with interface kit?
ty
Thank you very much....
banderas
RJ 11 ON Densitometer side,
3 conected ground
4 conected
5 conected
2 no conection
tks
sorry i didn't get it, is it any way that you can check pins connection on both side and post here,
i would like to make cable because i don't have either.
thank you
banderas
Is it possible to check pins connection on both side and post here,
Thank you
banderas
Hi newbie
I have same problem,
Do you have any solution?
Tks
banderas
sc988
sometime after turning on, it pops up sc998, and will not gone until i do #5-801-11, or remove nic . contact should be ok, because i put screw insted plastic holder to press nic to...
arching?!?
it happened to me only when i turn on machine,
before moving drum.
so it can be something else.
i did firmware.
After i remove NIC, code disappears, otherwise not.
ok i will try...
surgery was successful,
patient died,
i am a tech
Hello Max toby,
so did you find solution?
i am fighting with 1045 with sc998.
it should be something with memory.
all the best,
banderas
If you need Canon IR 210S for parts free in Toronto Ontario, email me at strujar@yahoo.com
I can't print test patern sp4-417 or sp5-955
IPU board test from the SP mode (SP4-904-001 and SP4-094-002) is OK.
it print: Prints out logging data sp7-809 and 902 Data print: Non-default.
...
Hi everybody,
I have problem with 6513. Machine has fiery 710.
There is not any sc code doesnt make copy, but printing OK. when i hit start (machine is warmed up), it is scaning the orginal...
according to the service manual i have to flash machine.
can i get from someone software for that?
tks
banderas
No it is IR 210 S
Like i said i am not trained for IR digital Canon.
The machine is without printer controler.
tks
banderas
Hi all,
I am a trained technician for Ricoh but in my life I did work with many Canon machines like NP1550, NP38..., 6317, 2120, 6330, 6045.
I got one IR 210S with french language (on the...
Fusing oil overflow
Symptom:
• The oil overflow sensor detects oil.
• When the machine covers are
closed, the oil supply unit is not
detected.
• When the machine covers are
closed, the fusing...
I need the folowing parts for FT3813
889855: Developer Type 3
A219 9510 OPC Drum
A190 3550 Cleaning Blade
Aficio 551
A294 9510 OPC Drum
AD04 1056 Cleaning Blade
Hi
first,
clean all conector on toner cartridge, inspect transfer belt unit and clean sensors.
Clean contact all on developer unit.
good lock