go to my konicaminolta.
konicaminoltabusiness solution.buuiness products
service&support
support&driver
C500 -----for the drivers
send me your e/mail address (scallanjoe@yahoo.com )
...
Type: Posts; User: scallanjoe@yahoo.com
go to my konicaminolta.
konicaminoltabusiness solution.buuiness products
service&support
support&driver
C500 -----for the drivers
send me your e/mail address (scallanjoe@yahoo.com )
...
konicaminolta trained - experieenced on kyoceramita
konicaminolta models from C6500 to7410--kyoceramita km1820 to 250ci-500ci
if more info needed e to (scallanjoe@yahoo.com) willing to...
i've been at this for about 20 years and you are right, most coustomers blame you ( even if you have never been there ) sale people are ass's
most service mrg.s forgot how it is in the field,...
to follow is my resume if more info needed please let me know and thank you for your time
Joseph P. Scallan
P.O. Box 671
Van Alstyne, Texas 75495
send e/mail add'
i'll send s.manual
scallanjoe@yahoo.com
send me your e/mail add.
& i'll send you the s/manual
...
ok
1st let's send all attachments to my yahoo e/mail
how let's do a test pattern for density of ea. color / section 7.6 of the s/man
do ea color from 256 / 175/ 65
...
GOOD / HOW ARE THE TRANSFER ROLLERS INSIDE THE THANSFER BELT
KONICA'S c500 & (MINOLTA'S CF1500 ) I THINK IT'S CF1500
ANYWAY SEND ME A E/ M ADDRESS I CAN SEND YOU A 8050 BOOK
1st have you cleaned p / heads/m-c grid & wiress/,
2ed is the problem off the glass or print' if print are you useing comand work ststion,
3rd what dose the density out put charts look like...
OOOO lets not for get that real cheep insurance
just in case some ass hits you so that grate job at that grate company don't get sueded
by that ass that in this country with...
it's been awhile but konica used to have comp. cars
i am looking for work there a few comp.s that have comp. cars
if a tech has to use his car it's like this
...
sounds like you got it
that sensor causes more jams than any thing
catches all the dust
jose
there is a photo senser just below the trans roller / remove the roller you should see it / paper dust covers it cause
jams / open r/side door look for black strip just...
send me a e / mail address
yahoo has a 5gb attachment
worst case it wont go
scallanjoe@yahoo.com
when you say you ck all sensors i assume ?
you clean / ck the 1 under the trans roller ?
yes see pg 71 o parts man/& pg 316 o s/man
3b02-failure in communication with fusing cpu.
remove cover's on r / frt/ side of mach.
you will find a board there fuser...
you have it
yes you have to have access
id and password
go to (mykonicaminolta.com) you will see (my konicaminolta.com-konicaminolta secured extranet page )
at this point you have to have a id & password
i am no longer employed so i...
per s/ man
10871087 do u906 if not what you want let me know
ck-
psz sensor on/off s/w 4-1 to 0 & 4-0 to 0
also ck tcr sensors & adjust
this info in s/man
if you need 1 e me at scallanjoe@yahoo.com
in pdf it's38.2mb
after ck,ing some old service tickets
had to replace the ihpu board
faceing mach. r/side
remove covers you will see where fusser plugs in
try removing fuser unit & reinstalling
ck all plug in's
not sure what your asking ?
are you useing konicaminolta supplies or after market
if you are a authorized dealer in good standing//
my konicaminolta-has a mhtml doc.or a detailed priceing doc
has pt #'s on supply items drum toner hdd 's and on all accesories
...