Search:

If I'm not mistaken it was version 40 sir,
In case that my machine was included on the list you are talking about is there any solution?,

You mean sir that the fusing it self have the problem?

Good Day too all,

I have a C8000 having uneven gloss on the edge of the copy for about 10 - 15 mm, so far the things I have done is that I followed the troubleshooting guide mentioned on by KM...

hello guys, i need your experties about the problem i have encounter in Bizhub 751............
anybody have the idea how to copy the File of the working CF CARD into new CF CARD
i try to cut and...

i agree about it,it will indeed need a lot of discussion,

hello guys i need your expertise regarding the problem of my 1 BH600 the problem was the sand clock only shows in the screen no KM logo although it initializing fusing are warming up i have change...

i have encounter that keeps on warming up after a couple of copies that's it always warming up
try to change the TSCB .................. do this first before the fusing unit which is havier than...

hello guys can anyone tellme wher can i get the ISW TRNS software.............


thanx

thanks guys for the info,
i'm not that familiar in this controller it just so happened that this problem was passed to me.............
thank you so much

how about the IC-408 this is the built-in controller right?
and the IC-303/304 was the server type image controller,
Actually franklly speaking i'm facing problem wit the feiry it does not...

hi guys i need some info.....
i have this C6500 full option with feiry it is possible for me use the embeded controller of C6500?
thus all the options will work ?


thanks

which is which?
sample 1&3 is your 1st side copy and the 2&4 is the 2nd side copy if its like this it seems you have a moisturized paper.....

good day sir i already done the logical format and F/W upgrade it again,after showing "UPGRADING ADDRESS BOOK IS OK" it shows another error message which is "LICENSE MANAGEMENT ERROR" after a couple...

i will format the hdd
thanks for the advice i will try it
hope it will work

yes sir that's correct after i upgrade it the message appears,
how can i logical format the HDD? (if the machine showing this massage)

thanks

guys any idea about the the message appear on the screen "UPGRADING ADDRESS BOOK.......... PLEASE DO NOT TURN THE POWER OFF"
how long it upgrades ?
there is no other message in the screen only this...

i tried already that hooking up into a loptop but i can not ping it i cannot even make print. i already done the isw also. it was working perfectly before but all of a sudden costumer called and...

agudmove i will try what you said i hope it will solve my problem

yes i have replaced the NIC and the ligth are flashing the DATA keeps on blinking no prints came out

hello guy's i need help about the BIZHUB750, the machine was suddenly out of the network I can not ping it but the ip detials was correct everytime i make network scan the error deatils show was...

hello guys can anyone help on this background copy (see attached sample copy ..... hope you guys saw the background)........... there is a ligth black background and ligth cyan as well...

thanks for the response but i have done that sensor sensitivity adjustment

hi folks i have this BizHub 1050e now i'm facing a problem the jam code was J65-02 i have replce the sensors,mirror seals and even the ADF control board but problem still the same. machine now is not...

hello guys
can any one help about my problem on BizHub 1050e,
this machine give me problem for almost a month now,
there is no malfunction code,
the optics unit does not make any initialization...

saan ka maks sa pinas ang kumpanya nyo ba na nasa pinas din ba,
performance wise good machine i have 5 units which i maintain 1 of them almost makes 3.5 million copies and still working good with...