Search:

Hi madas,

The problem is the ISU Pwb ( Image scan unit ),
I had the same problem, in this is case it's necessary replace the ISU.

Hi,

it's no possible to disable the service mode function 1087 1087 but in some recent models it's possible change this code
by the sim. U010
Be careful !
You can change the maintenance mode...

Hi Samuele,

Ask to end user if place the original on the contact glass,
in this case probably the user close the DP when the ISU scan the original.

I remeber that in this case the 3140 produce...

Yes I confirm this, I'm waiting for jig to the end of september. I hope that the problem will be solved....

With the sim U917 you can use KMSetup Tool to open the file ( not all... ) and convert the file for different Kyocera family models.
Insert the USB key, back up the address data with sim U917 and...

Hi,

The bundled toner container for the 2550Ci is a "starter toner" or a standard toner,
how you can recognize a starter toner from a standard toner ?

There is a special mark outside the...

hy Cleardata,

I had a lot of problems in the past,

for example,

Panel locked in "Welcome", HD problems, C code C6020 , various CF code.

Problems have been solved by firmware, but my...

Hi,

my opinion is :

Taskalfa 420i or KM 4035 ( old model but beatiful machine 0 problem )

..... no KM 4050 :eek:

Tray the port 445 instead of the standard port 139

This is a big problem also in the european market.

During the rotation, the belt shifting to the rear side of fuser unit.

The problem is the position of the adjuster plate of the fuser unit but...

Hy netad 1

this is a simply way that you can use:
First:
Sim U000 stamp the maintenance mode.

Then execute this simulation to reset the machine:
Sim U020; 021 ; 022
Sim U024