Search:

Yes I am running it on thick 1 and I am pretty sure it's fuser related but I was thinking it might need to turn up the temp but that didn't work so I will try turning it down.
Thanks!

We have a Sharp 4111 color copier that is leaving a smudge line on the back 2 inchs from the end of the page. It's also happening mostly on glossy paper although it does also happen on regular stock...

Jamming consistantly on duplex only. Have replaced Duplex clutch and sensor but no help?

Thanks Blackcat! We had already switched out that sensor but he had used a used one so we went ahead and replaced it again and so far we have not had another jam code but on this machine sometimes it...

We keep getting a Jam code 50 once in the morning most mornings. We have replaced the exit unit, a one way drive gear in the Job Seperator, and the fuser. We have also updated firmware. After we...

I just got off of the phone with a technician on sight and he said that when he switched the motor the motor is now running but he still gets the error code coming up? We do not have the spring yet...

Hey Blackcat,
We are having the same problem with no movement on the waste toner motor even switched the motor with no improvement! We tried to upgrade the firmware and keep getting a Main CPU error...

Yes that was the problem, I had just started going thru everything that this motor was driving and someone had also put some oil on some of those front drive gear and pulley shafts and they were all...

I have an 8030 that will intermitently throw a jam 76. It will be running along fine and then all of a sudden the second feed motor that drives the big rollers around the corner to the document glass...

I dont have a Booklet Feeder on this machine so I don't see where that would have anything to do with my problem?

I have a brand new DF-760 on a 250ci that is jamming in the finisher when stapling 11x8.5.
The problem is there is a little white plastic piece that is supposed to tap the top of the paper in the...

Looking for affordable print scan u for kyocera/copystar 3035/4035/5035
also would be interested in fax system j for same machine

Looking for affordable print scan u for kyocera or copystar 3035/4035/5035
also would be interested in fax system for same machines

This position has been filled. Thanks!

Yeah but I went to school in AZ and it's nice there in the winter but you can keep the summers! Especially when I remember that it didn't drop below 100 deg until after midnight! 99 as a low for the...

Thanks!

My email is Loren@vbmalaska.com, but I can not find anything about the IP address in the manual? I think it must be in the Printer excessory manual which as near as I can tell would be an AR-P11 but...

We have a customer that still has an old sharp ar-235 that we did not sell them but we just replaced their router and i need to know how to go in and change the ip address on the machine so that i...

Just wondering if any body knows of a way to make these scan longer than 14 inches? I just sold one to a customer that routinely faxes an 8.5 x 17in credit application and the old machines didn't...

It doesn't look any warmer in Buffalo than here? Its 28 deg and snowing here today which is about the same as I am showing in Buffalo today!

Have had this issue with this machine off and on for some time now... I read in a past posting to clean or replace transfer belt speed sensor, where might this be located? Is it part of the transfer...

That is just how he signs most of his replies! I am sure that he did not mean anything by it! That is a decent rate though!

Kyocera and Copystar are the same! Only difference is the name on front of machine and of course Kyocera keys the toner so it is not interchangable. It is just so Kyocera can have more Dealers and...

we have 7, 4 I.T. and 3 Copier

I agree! It is awesome! My dad worked for Xerox when I was a kid and we used to use it for everything! Not sure where else to get it though?