Search:

Have a MP9001 with 650K on it. Started codes 545 first thing in the morning on Power up. Reset it and works fine the rest of the day. New t-misters,(center one is a non-contact) Heat roll, washers in...

IRC 4580 with 194-999a error code. Replaced DCON2 Maisey per Navi suggestions. Colors are off in PF direction. Any Help would be appreciated.

Yeah, did think to pull all the circuit breakers first, all I had was a silkworm and a box of ripcord handles...

Thanks very much! my manual has nothing but numbers for the Y variable. Must have...

51.2K printer error. reseated connectors. K is not in the manual I have. Has 0-3 options. What the heck doed the "K" signify?
Thanks all...

Reman. (cool avatar!)

yes. I have the feeling the media is not made "flat". The 4015 has a different fuser and uses less pressure than the 4250 and the 4250 gathers the loose paper at the trailing edge of the envelope and...

4250 wrinkles the trailing edge of envelopes. Replaced the fuser and it still does it. Feeding from MF bypass. Using paper path test. Preprinted and plain both do it. Take them to a nearby 4015 and...

Hey blaze, And anyone else interested.

Thanks very much for the help then. I replaced the Controller board and the unit came on in fine shape, but with an L9 error. Looks like it is looking for a...

Thank you very much for the help!!

Sorry it took so long to reply. The unit has been running without trouble for a long time. No Maint or changes prior to call. I might like to get Part #s on the DC Cont. and the DC Power supply unit...

When pwr is turned on, the condenser lense cycles, there are 2 dashes on the display, then E0273, E0850, E0202, It cycles through these a few times if I press a control panel button. Then it quits...

Showing error codes and stuff on display I might need a part # for the dc controller.

Something keeps showing up in my SMC reports when I print them out. 990 and 991s. These are MP 6000/1s up to 9001' ans 1356EX. Some connected and some not. Different places and volumes. I see them on...

Nailed it! I looked at the fuser removal section of the SM. There is a picture of the rear of the 3050 with the red wire coming around the corner and going into the top left area of the rear. There...

DADF-T1 controller was bad. Thanks!

Mine at home did this. Downloaded the latest firmware from HP and reset the unit, all problems solved!

Prints are grey and sort of mottled looking. We changed out the cart. right away and still light. Transfer roller is in place. Looking around inside, I found a red wire with silver connector on it...

That is how it did for me. The 227 one time and the 202's thereafter. The help files are confusing; calling the same PCB a controller and then the driver. Your help is greatly appreciated.
Part...