The bushings on the fusing belt tension roller get worn out causing uneven tension, and the belt to slip.
Tension roller : AE040081
Bushings : AA080373 X 2
Type: Posts; User: zames77
The bushings on the fusing belt tension roller get worn out causing uneven tension, and the belt to slip.
Tension roller : AE040081
Bushings : AA080373 X 2
Here's a few pictures of the drive and intake fan. The picture of the platter doesn't really show just how covered it was, but you get the idea?
[QUOTE=subaro;530324]When you say contamination of the platter, could you explain a bit futher or if you have a pic, upload it. I have open plenty of hdd and never seen one with contamination, it's...
The reason I ask is I visited a building site yesterday and had to replace the HDD, at the customers cost. Building dust had contaminated the platter, he was non too pleased as it's the second...
Just wondering, cost aside, anyone tried fitting a SSHD yet?
You could try (In advanced settings for the custom paper)
#120 Process Speed: Set to LOW - for a quick fix.
#84 Paper Gap Transfer: Set to OFF
If B&W
#22 Image Transfer Current B&W:...
I've seen the sensor feeler bend out of position as well, but it's not that.
The last time it happened the customer had run the last sheet out of the tray, as it descended they heard a weird...
Hi Guys,
Been having issues with the pulleys on these trays snapping causing SC50#. Normally the longer pulley at the rear snaps but I have had the short pulley go as well, front and back. For...
I have the full range of our production machines in my field varying from schools and hospitals, to local government and big commercial outfits, I'd say all up, around 120 devices.
There's a...
Thanks for the pointer, appreciated.
Was wondering how many of us on here work on Production Print engines, and what everyones experience and perspective is on it. What problems have you encountered, particularly with the machines...
Was wondering how many of us on here work on Production Print engines, and what everyones experience and perspective is on it. What problems have you encountered, particularly with the machines...
So like, what's the PM counter saying for the fuser?
Here you go.
I'll see if I can post it in the morning.
Check out Tech Bulletin RM077099.
I've never touched them, never found the need, and suspect they either do nothing, or are factory set for a reason.
Is it just the Magenta drum that scratches? Has it happened more than once?
Forgot to mention, also check the top cover with the three scew, if the mylar there is deformed, it will wear on the drum, and clean the Doc blade gap while your there.
First I'd check the cleaning unit is locating correctly, and also check that the drum locking scew is locking fully. But normally a build up of toner on the Dev rollers is what causes scratches like...
Those numbers don't seem to exist here in NZ, the only part numbers for the Baron LCT's (RT5070 & RT5080) that we have listed are (pick up) AF030080 (feed) AF031083 & (sep) AF032080 which are for the...
Yeah, I normally replace them as a set now; I've been caught out by that a few times. Anyone know if a different Torque Limiter would work?
You might be on to something there, I'll give it a go as well.
It's not one particular customer, it's literally every unit we have out there! So various brands of stock, 80gsm and in normal office environments. I did have one where the paper was quite damp, but...
Have been finding lately that the feed tyres for the LCT are not lasting nearly as long as they're rated for. Typically start failing after 130K compared to their supposed life of 1000K. Even finding...
Have had similar, saying out of paper, disabling SNMP cured that one. Also had not printing, we found that there was a few users that had loaded PCL6 drivers. Deleted and installed PS drivers, then...