We have an opening for a copier repair tech in the Porland, Oregon area. If interested please call (425)272-4310
Type: Posts; User: alpha-omega tech
We have an opening for a copier repair tech in the Porland, Oregon area. If interested please call (425)272-4310
Immediate openings for experienced copier techs in Oregon and Southern California. We are a Kyocera owned company. Please send resumes to jpoerio@witt-company.com
We are a Kyocera owned company in need of a
copier tech in the Corona, California area.
Full-time copier technician position available immediately, to a technician with experience on Kyocera...
Copier tech needed full time and asap in Seattle/Tacoma WA area.
Full-time copier technician position available immediately, to a technician with experience on Kyocera copiers.
We may have an...
Looking for a technician that can work on copiers, printers, and shredders. We
are a Kyocera, HP, and Fellows dealership. Please email gust@nuoz.com or
joet@nuoz.com
Has any one seen a CS 255 or a CS 6530 toner level drop to 0% after it reaches a level of around 40% to 35%? Is there anything to change on the copier to read a normal sequence of toner usage? The...
We have a new Kyocera FS-C2126MFP+(one month old) with a total of 4500 on it. The color is 1100 and black and white is 3500. The color registration has to be adjusted at least every three days or the...
It is very intermittent. I did see it happen once after updating the firmware and replacing all the boards in the operations panel. After it comes out of sleep mode, the panel is locked up no matter...
Yes, I can do it when copying but not when printing. I can't change the settings in the driver to do the same as I do in the copy mode. Maybe the can be the updated version of the KX driver next...
Is there a way to print 3 pages from a single document and staple it? I can copy a single document with a quanity of 3 and staple it, but can't do the same with a one page document printed with a...
I had a lot of issues with the Tk-479 toner for the CS305i and the CS 6530i dropping from 25% to 0 in the same day. I've had a customer use 3 toner cartidges for a total of 13k on the copier. Their...
Is there any way to hide the Address Book in Command Center on a CS 3500i? Right now, even with being logged out the address book is still accessible.
When I went there, I could not get the op panel to freeze up. I did a firmware update. Thanks for the help.
I am working on a Muratec MFX-2050. I can make a copy and fax. Then, the copier freezes up and I cannot switch from copy, fax, or scan. The only way I can get another copy is to turn the copier off...
There where two pins in the drum unit connector touching. This is weird because the copier was working fine according to the customer and all of a sudden it started copying and printing color bands...
I checked the bias connections. Replace the HV unit. Downloaded the latest firmware. The PDF is a sample of an internal Status Page. Has anyone ran across this issue before.
I have the same issue with a 300ci. What was the final solution. I set the email size to 0 and the SMTP timeout to 20. I changed the scan to default to black and white. Now it shows a large file...
When installing the KX print driver to a network or on my laptop with a crossover cable(so I eliminate the network completely). The driver when installing will not discover the copier, so I do a...
I did not know how to edit my post for the part # previously posted in the tenth post but it should be 302KV02542. See the attatchment.
The part# for the gear for top cover is 302KV02180( Gear top R). This part is to attatch to the top cover and it affect the top and rear cover switch and locks down and and open toner cartridges....
Carry brasso and a cotton pad to polish the drum and you will get more copies from your drum. Oh, the bad old days. I remember them well.
How do I clear the information on a Konica 7022 hard drive so I send the copier back to the leasing company? Thank you for the help.:cool:
I tried admin. There is only a spot for a password and not a username. Is there a way to reset the password to default?
I am trying to setup scan to folder and scan to email. I need an administrator password for the copiers web browser page. I have done set up for scan to email and scan to folder several times for the...
I tried a charge roller from a FS-3900 printer and the prints came out much darker. I know that this is not the solution because when the charge roller is older it develops a coat on it and the...