Search:

Type: Posts; User: austonrush

Page 1 of 10 1 2 3 4

Search: Search took 0.02 seconds.

  1. Thread: U2-74

    by austonrush
    Replies
    27
    Views
    12,652

    Re: U2-74

    Agreed, this is an excellent way to verify if it is the board or Msata that is causing the error. Hopefully you can fix it with the first component every time once the issue has been verified through...
  2. Replies
    3
    Views
    582

    Re: MX-M565 Jam but no code.

    I'd 100% replace the hdd, this is a pretty common jam issue for this series of Sharp once the hdd gets older. New HDD should get you back up and running smoothly
  3. Replies
    7
    Views
    5,698

    Re: SHARP MX3070N - U2-00 Error Code

    I don't know, I would not have taken 3 eeproms from a different machine and put them into a different copier. I would strongly recommend you change out all 3 with new ones at the exact same time, do...
  4. Re: Reported adf problem hp m521 intermittent

    HP Doesn't make those ADF assemblies serviceable other than replacing the feed roller kit. I've seen your issue before and it can be caused by a damaged wire in the wiring harness for the adf. They...
  5. Re: HP M479fdw torn mylar film on slit glass

    I don't believe HP ever made these, but you can find 3rd party aftermarket ones, that work just fine.

    Just search for HP M479 mylar strip :)
  6. Re: Using Toshiba toner in Oki MPS3537mc & MPS4242mc

    Iteminc.com is the only North American distributor for Oki now. Did you check with them?
  7. Re: HP Color LaserJet Enterprise MFP M681 - Unsupported disk

    It depends on whether the partition is encrypted or not. It works on some machines. Never had any luck with plotters though. Worth a shot to try on a couple of the newer E77XXX ones and see.
  8. Re: HP Color LaserJet Enterprise MFP M681 - Unsupported disk

    As Spud42 said,

    you need to use an HP HDD, however, once you have a good drive you can create a clone of it with hdd raw copy tool and store it for future used. You'll then be able to use any SSD...
  9. Replies
    11
    Views
    1,787

    Re: BP series Atlas/Titan Sim6-8

    You'd hope when buying a brand new fuser this would be done at the factory.... ugh lol. What happened to just installing a fuser and being done!

    I have not done this adjustment with any new out...
  10. Re: T520-new printhead keeps getting sketchy after a few to several hours

    Glad to hear that suggestion helped. Yes, normally most plotter throw a code when the carriage assembly isnt going back to the correct home position. But with the T520 and T530 I have had this a...
  11. Re: T520-new printhead keeps getting sketchy after a few to several hours

    It's quite possible the PH is defective. If you can get it replaced under warranty, start there, then you know!
  12. Re: T520-new printhead keeps getting sketchy after a few to several hours

    When you installed the new printhead did you install it with the 4 brand new ink cartridges it ships with?

    Does the printhead dock properly over the service station once a plot has been...
  13. Replies
    5
    Views
    781

    Re: BP-60C45 jam printing labels

    if the labels are actually one single sheet sized at 8.5" x11" then I'd recommend a lexmark MS725dvn printer.

    If they are smaller then get a proper zebra type thermal transfer printer in there!
    ...
  14. Replies
    1
    Views
    494

    Re: MXFN11 Stapling Issues

    For all those interested I was able to solve this issue

    The cause was broken staples caught in the the track for the front alignment motor arm

    Resolution:
    - Pulled apart finisher, cleaned out...
  15. Replies
    1
    Views
    494

    MXFN11 Stapling Issues

    Hello Everyone,

    I have a MXFN11 attached to a MXM565 that is having vertical alignment issues on finisher output and it won't staple properly. Please see attached image

    It seems to be some type...
  16. Re: Need help with flat spots on MX-3071 fuser unit.

    These fusers require maintenance or they fail. You need to run the Fuser Cleaning Page on all these units on a semi annual basis, run at least 20 pages to start



    Settings Icon (wherever you...
  17. Thread: H2-06 Error

    by austonrush
    Replies
    4
    Views
    5,189

    Re: H2-06 Error

    Thanks for the quick response guys. I have already swapped the fuser onsite so I know it is the fuser that is the issue. I'll do a visual inspection on the belt and sensor and see if the belt has...
  18. Thread: H2-06 Error

    by austonrush
    Replies
    4
    Views
    5,189

    H2-06 Error

    Hey Guys,

    I have a Sharp MX407FU1 Fuser that I need to fix. Service Manual Says the TH_US2 Thermistor is the issue.

    I cannot find this part number in the parts manual.... Anyone know what it...
  19. Replies
    7
    Views
    5,698

    Re: SHARP MX3070N - U2-00 Error Code

    Latest Update -

    This time we Replaced all 3 EEPROMS with new ones in one go (PCU EEPROM, SCN EEPROM and MFP EEPROM), and forced the copier into CN Mode on first bootup.

    Once the firmware...
  20. Replies
    7
    Views
    5,698

    Re: SHARP MX3070N - U2-00 Error Code

    So we did this and everything matched up. Which shouldn't be the case...
  21. Re: HP M551dn How to Rebuild the ITB Transfer Belt

    You're wasting your time without a new blade!

    There's no manual for rebuilding them as far as I know. Take some pictures of the gear assembly layout around the blade before removing them. It comes...
  22. Replies
    7
    Views
    5,698

    SHARP MX3070N - U2-00 Error Code

    Hey Guys,

    Has anyone here had a U2-00 error code before?

    I've replaced the SCN-MFP PWB and MFP EEPROM as well and I still have the same error on bootup.

    I'm think of changing the PCU...
  23. Replies
    42
    Views
    43,142

    [Misc] Re: Admin Password reset

    An authorised dealer needs to contact sharp directly to get a reset code for that model.
  24. Replies
    23
    Views
    3,524

    Re: M605 - Jams First job of the day

    Hey Guys,

    The most common cause of toner jamming on all these newer hp toners is the drum dongle gear. Either the spring pops off, or one of the 2 pins will snap completely. See image below:
    ...
  25. Replies
    7
    Views
    998

    Re: HP LaserJet CC519A 59.FO error

    As you are an end user and not a tech I would strongly suggest you keep all screws with each component and repair it in a very orderly fashion, stacking everything up neatly in the order you remove...
Results 1 to 25 of 231
Page 1 of 10 1 2 3 4