Unfortunately I am not getting that error code.
Any other thoughts - There has got to be a way to hard reset the system back to default without accessing Tech -mode, wehich I can't get to
Type: Posts; User: Guitarist69
Unfortunately I am not getting that error code.
Any other thoughts - There has got to be a way to hard reset the system back to default without accessing Tech -mode, wehich I can't get to
I have a CF 2002 which as of recently, when I turn it on, it warms up and stays stuck on the "Konica" bootup screen, and won't fully initialize. Not sure what the problem is , or if there is anything...
Unfortunately - a previously created partiion was not the problem - the drive had no partition on it. In any case, I went through the process to make sure it was completely clean.
Unfortunately...
Correct - I am using the 3101e internal controller - I will try to delete the partition on the HD and see if that helps. I bought the HD new off ebay but i was surprised that it was originally...
Sorry I didn't explain thoroughly first time around- Hard Disk format does not work- Sits at 0% , resets and comes up with error. Hard Drive is good though.
I'm at my wits end on this copier -...
I finally got the right connector for pin lineup and hooked a 30gb hard drive up that I know is good(tested it on another computer), but I am getting error code C-12CF once it is set. It is not the...
How many envelopes you talking about.
I am running a CF2002 over a small windows workgroup and am having problem with print speeds - I am getting about 4 pages a minute on color(very little color on the document) when I should be getting...
Thanks for the help - I cleaned the LED on the Cyan with rubbing alcohol(scrubbing them) and that did the trick.
Thanks again.
Thanks - I figured out the pinout - The PWB-F board is nonstandard so I just have to get a cable made by someone - The problem is IDE connectors are not to common anymore.
I bought a 30gb hard drive(Didn't want to go too big for compatibility issues) and made a mounting bracket so I am all set on that end.
But the connector is causing me problems. since the...
I have a CF2002, and am getting blurry blue print most of the time with text. it only seems to occur with certain lighter shades of blue on thin text fonts - See attached sample - What is strange is...
From my router I have 2 DNS entries(1 and 2) and a Default Gateway address, as well is an IP address(Which would change because I am on a dynamic IP) but not sure which I should be using and where on...
I got the scanning to FTP working. I ended up ditching typsoftFTP and switched to Quick N easy FTP and got it working no problem. As you said it parses out multipage documents into separate files...
Thanks again for all of the good info. I did set up the FTP functions already as detailed above but will try again tomorrow, maybe with another FTP server software - Another thread discussed a user...
I am looking for the complete HDD-5 or 10hard drive kit (Drive. mounting brackets, and interface card) for cheap for this old dinosaur - Konica/Minolta CF2002.
PM me.
Thanks,
Michael
Thanks to everybody with the help thus far - I am making progress, but still not scanning yet. To answer the poster above - I am printing and copying okay -just not scanning yet
I have the 3101e...
Thanks for the help. I am still having difficulty getting the unit to even go into scan mode - When i press the scan key, the key won't light up and nothing happens it doesn't even show "Scanner...
I appreciate the replies, I understand its an old model - If it was fully functional, it would suit our limited needs. Can the scan function work without a hard drive installed. One other item - On...
A long story but we purchased a used CF2002 from a copier tech that claimed to provide the sales as well as the service. Basically, we paid extra to have it set up as well, and he interfaced it to...