Search:

Waited a couple of days to see if anyone else responded to you and they did not so I will tell you I have used a couple of the aftermarket drums with no problems at all. As an independent I just got...

I guess we all must reach a point in time to call it quits and I have reached mine. I have been in business for myself for quite a few years and I have a decent supply of wide format parts, mostly...

From the view I am getting it sure looks like a cleaning blade problem. If you can find the bracket for the cleaning blade assembly (release the levers to gain access like for jam removal) usually on...

Try going to keepitprinting.com. This a KIP info website. One of their guys should be able to give you positive info.

If anyone is interested I have four(4) tubes of AO70 (Ricoh wide format) toner I would like to get rid of. $70 per tube or make me an offer I can't refuse. This is genuine Ricoh toner, not generic....

Make sure you clean the developer rollers really good. KIP has a scheduled & a process set up for cleaning these rollers. I'm not exactly sure what it is but I know it is quite often, more often...

You are correct it would not be user repair unless you want to try it with no manual. As far as the cost I'm not really sure about that either in your area. The bigger problem will be to find...

OOPS! For the first time in my life I screwed up?? I was thinking that was a digital machine but it's analog so if you lost charge (you should get an error code) you would also get a white copy...

About the only thing that will cause a white copy without an error code is if no toner is gettting to the page. If you loose charge you will get a black copy. Lose lamp you will get an error. About...

Good Luck on finding the 7056, all I have is a few different sections for the 7050 that also refer to the 7056 as the same machine with a few minor changes.

0802 110000010 Within 10 sec the
fuser must have
reached a temperature
of 100 °C
• Check NTC's
• Check heaters 08E1 08E2
• Check main controller
22PBA01 (See 22 Con.
page 401)
• Wires SSR...

About the only way to get those parts is directly from KIP or you can also obtain them through a Konica Minolta dealer. i can provide you with info to a KIP dealer in my area but by the time they put...

I know you said everything is clean but it really does look like it needs a new charge wire and also make sure you clean the bottom side of the optics real well although it does look like the wire...

I am not real familiar with the KIP you have but if it uses the same push button type inter locks the older version have they are a real problem. Sometimes they will work fine and the next time you...

I've been using a product called Sprayway rubber rejuvinator and cleaner for years. Works great on any kind of rubber roller. Only thing I work on is wide format so if it will clean the wide rollers...

There is more to "changing the dev." than just having the service code to enter diagnostics. If you have a service manual which you should have before attempting this it will show you how to enter...

The fusing cleaning roller only turns when the machine is reversing the paper from the fuser, that is why it does not always print. You can try scraping the streak off but anything you clean the...

I would look for anything that would allow the paper to lift off of the transfeer/detack assembly such as the detack shutting down or even a speed control problem that would allow the paper to...

Make absolutely sure you check the drum drive gear set up. Common problem for the setscrew to come loose and the drum will not turn giving you error codes. The machine will appear to function...

I,m not sure how much luck you will have with this but at one time you could get the serial number from the card in the controller and the serial number from the machine and the computer serial...

I do not have a source for the KIP developer, I order mine directly from a Kip dealer. May be paying to much for it but I use very little of it. You might try checking out this website, it is a...

Even though these machines are monocomponent there still need to have the dev replaced at times. With 143 K on the machine it sounds like you need to go through and give it a good cleaning (corona...

Glad you guys said something about this !! I thought something was wrong with my system. I have been trying to figure out what was wrong for two days now. If anyone gets it figured out please leave...

I think you will find the safety switch wiring does go through the ac power supply. You can also unplug the connections at the board and check the entire circuit from there.
(sounds like you still...

You can use part number A1633570. Use and order these all the time. Keep at least 4 in stock. This blade is used on all of the analog machines. The digital machines use an entirely different...