I cannot find that in my service manual. what is the procedure for that? I have the release version of the manual
Type: Posts; User: crwoo
I cannot find that in my service manual. what is the procedure for that? I have the release version of the manual
Hi, I am working on a Xerox C8155 that is showing the message Scanner Calibration error. User intervention is required to call for service if problem persists. Scan and Copy services are available,...
Hi, thank you all for your help. i didn't realize that it was a dual component. I will replace the developer.
Even if the toner fell out while i replaced the drum? it didnt happen during operation.
Isn't there some command that would somehow refill the developer?
Hi, the canon irc7065 i am working in had meganta streaks on prints so i replaced the magenta drum. After replacement the printer only prints half the sheet in magenta. The other colors are fine.
...
Hi, i have a iR C7065 that is leaving streaks on bottom of paper, i am assuming one of the rollers needs cleaned or the blade. where do i access those items on this machine?
attached is a picture...
So you suppose I got a bad unit? That's what I was wondering. That kinda turns my 5185 into a brick :(
hi,
i dont have an update cd. i paid 150 for it. I know they are a lot more new.
i wish it would work.
Hi, thanks for the reply.
According to the printout that came with the server it says Software: EFI Fiery system 8e Version: 1.02
I am not sure where to find the software on the printer, but the...
Hi, I have a C5185 with H1 controller that i would like to throw off the server, but as I hear that isn't easy.
My problem is that my H1 server required rebooting a few times a week to work so I...
I understand. do you think it's the scanner unit? ever heard of the scanner unit scanning much lighter or tinting certain colors on one side?
Thanks
hi
when i place a full color photo on the glass and copy or scan to computer half the sheet is very nice and towards the top the black starts fading and the black starts fading to blueish. all...
whats the best way to do the correct shading? I do not have a Densitometer. so what would be best way to do it by visual correction?
Thanks
thanks for the reply, is that to calibrate scanner or the printer? the printer colors are great when printing from computer. the problem is with the scanner only.
Hi, I have a image runner advance where when i scan a black sheet in color mode it will have the top part blue. I have concluded it is the scanner because whenever I print the colors are fine. but...
I tried all that and the switches work. everything on the paper tray works. is there any setting in the copier that could cause it to say load paper when there are a few reams in the tray?
Hi, thanks for your help everyone. I got it working by manually rebooting the server after entering setup mode. Just unplugged the server's power and plugged it back in and after 2 minutes it showed...
It doesn't apear that I have the printer kit. might do the transfer though.when i click on the setup it reboots the server and then it stays on the wait a moment (check power source... screen that...
thanks for the video. mine doesn't come back up after the restart. :( thats odd because the unit works, i just need to change the IP address...i don't need the H1 server, I just tried to remove it...
I have the same problem. it was installed but stopped working. switches look fine, unit registers with copier, but copier says load paper and the icon shows empty on the copier. everything else...
OK please do, that would be appreciated. :)
I have newest java and OSX mavericks. I also tried windows 7. I was able to change it before, but maybe that was because i had an OLDER version of java. i tried disabling the security setting in the...
Hi, i have a c5185 with a H1 controller and I want to change the IP address. I know how to do it, but my browser blocks it. I tried safari chrome and firefox on mac and chrome and firefox on windows...
no i dont know of any and why do you ask? can you refurb them? mine might need a new belt. not perfect.