First thing in the am, all fw updated.
Type: Posts; User: davydoodledo
First thing in the am, all fw updated.
New 5054 with frequent sc540s no binding on fuser, fuser drive gear cracked in half at 15k although.
Intermittent code without Fax board, red light flashing on controller, firmware up to date service bulletin flowchart says USB cable and/or op panel USB Board?
Sent from my SM-N910V using Tapatalk
How has business overall been? Staying buisy?
Model?
Anybody use a power screwdriver? Best and lightest?
To those working at big dealers or OEM's. How do you deal with the numbers game? Loose sleep over it. Or do what's best for the machine and customers.
Thanks. but all ready done that along with playing with belt tension
Which one way gears have people been replacing to eliminate feed in jams?
anybody fought with these TD SC's before swapped Dev units, somebody said a bad ID sensor board??
Any way to prohibit stapling in multiple sets if the copy or print job exceeds the staple capacity?
white socks are the best... otherwise company shirt or wear a tie everyday......
Please wait displayed any ideas? HDD???
anyone had issues feeding envelopes from tray 1 reliability?
How many of you are under the GPS eye?:)
yes, you got it.
Anyone have issues with the proof tray gate breaking repeatedly ?
Anybody having issues with low pitched groaning noises during long runs?
I have a KM4050 that gives a false add paper from the one tray PF750 LCT. Trays raise ok, and sensors ok, plastic tabs not broken off feed assy.
FW ver 2000.027.018
Any ideas?
...
It appears to cycle normally visually, already played around with reg buckle, but ill try a new engine board and a another new reg clutch.
i have an ap 410 printer that consistantly lags on single sided registration on the second and following sheets from 5 to 15mm. replaced all clutches, feed roller, pad, reg sensor. any ideas?
...