Did you find a fix for this at all? I have exact same issue. Thanks.
Type: Posts; User: connect
Did you find a fix for this at all? I have exact same issue. Thanks.
Wont upload pic. Sorry. I'll try later.
Anyone had this image issue before (see pic) same using print, copy and from USB stick. had this issue a month ago but only on something with red/magenta in it. Tried swapping all drum and Dev's but...
Has anyone had issues with the black toner not doing anywhere near its 30K yield. We are experiencing lots of these now where the black toner is only doing in some cases 20-30%. Non of the service...
very helpful. Will try all areas and check.
Many thanks.
hi all.
I have an 820 with very faint almost blank copies. looks like charge/bias fault.
ive swapped the whole carrige with another one containing the drum/dev/main charge unit/cl unit etc....
Hi. Had some special firmware from Germany that seems to have done the trick. No issues for a few weeks now. Also the current firmware V4.023 should contain this special firmware as well.
Hi.
The 2 brand new machines it still did it to came with the latest firmware.
Kyocera are involved and have no answers so far.
Cheers.
Hi all.
We have several machines out in the field, that start to get yellow banding/background. the banding looks like a charge or dev mag roller issue. however, its happend on machines that are...
Please can any one tell me what error code 543 is on a Oki ES8460.
Customer has put K toner in, and now shows this error.
thanks :)
Hi
We have many mpc5000 m/c's out, and some are having this trouble with constantly jamming around the fuser.(wrapping around orange roller) Now this only happens on full colour, b/w seems fine....
Is it possible to reset fusers drum and transfer units on these models ?????
if so how?
any info greatful
thanks.
I have 1x black
1x cyan
1x magenta
1x yellow
(and a waste box)
All are brand new still fully boxed and sealed.
Also they are samsung original cartridges.
...
Has anyone got the scanning working through NCP.I cant get it to browse to the sever, just says unsuccessful.
Been through and checked the path is ok, folder is shared with permissions.In user...
sc542 is a fuser code so u also need to reset sp5-810(fuser sc reset)otherwise code will stay there.
as we are a dealer for Develop, we have loads of these machines in the field, and constantly get probs with the IU'S.
They say no one else is having the issues, so just want to know if any one else...
We do the Develop ineo 203 253 353 451 550 650 series. (think bizhub is the same numbers)
Is anyone else out there having problems with the I U's(black and col). They just dont seem to last as...
Hi, sorry for askin a stupid question,when you say re-fabricate, do you get a new shaft.
not sure what to do with the shaft as it wears down at the ends.how exactly do you get the shaft to fit...
Can any one get hold of the augers inside the dev unit. As the shaft wears the dev leaks from the bushes.
On the older models you could order the shafts, but now there is no part number, only for...