Search:

Right, but am I able to access 44-14 while the copier is running a long run in order to monitor the high and low temp fluctuations?
When I enter in to 44 as the copier is running it stops the copy...

I am trying to verify the operating temp of the fusing unit in order to evaluate some bearings and AM rollers that I have been sampled.

thanks for your help,

Thanks for your help it is appreciated. I just quickly reviewed sim-7 in the SM will I be able to monitor the temp of the fuser or just the warm-up time?

thanks again

New to Sharp model MX-M503
Is it possible to be in simulation mode and run copies at the same time?
I have been told this is not possible.
I do have a service manual but have yet to look in to...

Based on you mentioning that you replaced the fixing unit I assume you did not just replace the film unit.
Also, to help clear up some confusion the LFR on this model, IR 3245i does not have a...

I placed an order with AMES on-line back in Oct. 2011, they called me to tell me 2 of my 4 items were going to be back-ordered. In Mar. of this year I ended up sending them an email asking them to...

I realize that on the surface asking about mixing toner in to a machine that it is not intended for sounds like a major mistake.
But, these two models use the same drums and fixing assemblies yet...

cucuklotz,
We see a lot of fusers during our repair process that have torn films at one end after the machine has been in the field for a while.
This has been known to cause a "groaning" at times....

Canon removed the dimm socket from later releases of the dc controller. They soldered the boot rom (IC301) directly on to the board in the later versions. You might try to flash the dc controller. ...

Where at in Missouri?
What OEM's do you currently find yourself working on the most?

gwaddle,

Merry Christmas and a happy and prosperous New Year from right here in the good ol' USA!

Thanks,
Which model or models would you have the biggest need for?
Which modular units are you referring to?

Have a good day!

Is anyone interested in having Toshiba fixing assemblies refurbished by a third party to save time and money?
Do you know of anyone that is currently doing this?
thanks