No, it doesn't work, as I said here -> CE Password Recovery
As far, as I know, the only official way for production machines is NVRAM replacement.
So I can't help you in this case.
Type: Posts; User: jotunn
No, it doesn't work, as I said here -> CE Password Recovery
As far, as I know, the only official way for production machines is NVRAM replacement.
So I can't help you in this case.
Unfortunately CE password reset procedure doesn't work for production machines.
Reset code for your machine:
MFP Serial Number A7R0027029096
Reset Code BNC6L-LT2HT-QB3P6-6ECMQ-RRC9W-WG8YD-ENBQG-MZDF7
--
Regards
Reset code for your machine:
MFP Serial Number A5C2021027354
Reset Code GHCKJ-KYEV3-PR6WP-FLCSA-7WWWP-WG8YD-ENBQG-MYTLT
--
Regards
You need to log into your machine web interface, similar to the link below:
https://publications.lexmark.com/media/library/LEXMARK/Software%20and%20Networking2/HO3877/HO3877_WC_USBIMPORT%20(2).JPG
...
I wouldn't be so sure...
Compare MSDS data - SDS (MSDS) for MFPs・Office Printers/ Production Printers/ Label Printers 3. U.S.A._Toner - Sustainability | KONICA MINOLTA
Please note that the fusing...
It's ok now, below your reset code:
MFP Serial Number A7AH011002299
Reset Code JWGMR-CBVZ3-RPFFF-WMG66-EPP3G-CG8YD-ENBQG-MYDNN
--
Regards
Hello,
please, verify the data you've posted:
Failed to verify the CE Password Reset Request Code.
The entered CE Password Reset Request Code, MFP Serial Number or MAC Address is invalid.
--...
This is true, but in the normal case, after formatting the drive (it doesn't matter whether from service mode or from the administrator menu), the only message the machine should show is that there...
Ok, so go back to the service mode:
- on the input password screen press [stop]-[C]
- screen should transit to "CE Password Reset..."
- send me clear photo with SN, MAC Address and Request Code...
> Now it says to reformat or enter the encryption passkey.
Try to go into the administrator mode, there should be available only two options - "Format" and "Reset Encryption passphrase" as I...
Yes, today we've met such machine.
Unfortuantely, the old way to deal with annoying PSU noises (Heater Control Level setting) won't work in those machines anymore.
In earlier machine models such...
So let's test this new fuser - load standard 80gsm paper into the tray, but set the paper as "thin" and print 10 pages of black gradation pattern from service mode. Check if toner is properly fused.
Your reset code:
MFP Serial Number A5C1041016004
Reset Code 58Q3Q-L54SX-G6QDE-SLWHT-F4HNM-2G8YD-ENBQG-8YTRL
--
Regards
Blank - machine in this state has no serial number defined.
Reset Code GD3XH-QNDLS-46JSW-JFLFJ-J7557-SG8YD-ENBQG-8YTL5
Try this:
Reset Code 3BRAP-VEV86-PLN6Q-CTS45-CDP6U-GG8YD-ENBQG-8YTL5
There is no guarantee that it will work, but I can try.
I still need the MAC address of the machine, I'm sure it was displayed on the reset screen.
Make sure, by the way, that you rewrite the...
@dacam20590
You have run out of available space in your mailbox, you need to delete at least some of the messages. Currently, no message can be sent to you.
MFP Serial Number AAJ1041000523...
Now the code is correct, so your reset code below:
MFP Serial Number ACVD021007862
Reset Code JAPWY-YW54Z-4VCVH-6Q6AD-B6L2A-WG8YD-ENBQG-EZDTN
--
Regards
Check again the data you sent, surely there should not be the letter O or the number 0 in the request code.
Hi,
no problem, if you send me the serial numbers of the machines I will prepare the recovery packages.
--
Regards
Reset code for your machine:
MFP Serial Number A7AH047001872
Reset Code 3Y78E-RHNRL-6KJUJ-JCP9W-ZUW83-6G8YD-ENBQG-EZDF5
--
Regards
MFP Serial Number A5C4021121533
Reset Code M27Z2-FTKKS-AMZWK-VN33X-9JCNG-GG8YD-ENBQG-EYTTX
--
Regards