Having run a Canon dealership for 2 years, I can confirm they make a great product.
I can also confirm the cost of parts is very high; only line I've ever seen that a fuser REBUILD costs over a...
Type: Posts; User: mojorolla
Having run a Canon dealership for 2 years, I can confirm they make a great product.
I can also confirm the cost of parts is very high; only line I've ever seen that a fuser REBUILD costs over a...
I would start with firmware; you can get it from a public. site:
Drivers & Downloads - VersaLink B405 Multifunction Printer - Xerox
Change the category to firmware.
:)
When fighting VOIP I always:
-make sure the actual phone cord is a 2-line, not the old style 4-line
-drop baud rates to 9600 (tx & rx)
-turn of ECM
-set coding to MMR
VOIP is also very...
Aries2 machines had known issues with DV filters, check the dv unit for lint under the dv doctor blade. You can save the dv material by running it through a strainer.
Also, as suggested, clean...
I tell my customers that any time you print from the internet, you are at the mercy of the webpage, much sadness may occur. Another issue is depending on the browser, you may not get all the print...
Shadow on rear of samples would indicate to me that the black drum is failing.
Enter service mode, dc612 and run pattern 10 to test the black drum unit.
:)
Tech AND the Supervisor missed this, and you had to bring the machine back to the shop.......?
Time to clonk a few heads together like the 3 Stooges.
Thanks for the info.
:)
Looks like machine is in Emergency Update mode. There is a very small dip switch on the MFP board which turns this feature on.
There are a few threads on this forum, with picture, that will point...
Just set up 2 yesterday and the email reads look exactly the same as previous models. Not sure if they will release additional firmware for this feature but as of now, nothing has changed from what I...
First thing would be to remove the drum, dv units, IT belt unit and fuser and visually inspect and clean.
I see a magenta haze on your example and possibly poor cleaning of the IT belt and or poor...
"Printing" as in sending a job from a computer to the device OR "copying" as in standing at the machine to use it?
I can tell you Copier1 are some of the shadiest folks I have ever had the...
Poor wording on my part, for some reason I thought there were 2 programable buttons for the bypass, turns out there are 4.
See PDF for 2 ways to achieve bypass envelope printing. You can make these...
When we have customers who don't want to utilize user codes, we install a printer defaulted to B/W and one defaulted to color. Probably your best bet considering the multiple hour drive as well. The...
If there is an option for Print Preview you could create a profile in the driver with the envelope setting, call it "envelopes" and save. Then they can choose the envelope preset only 2% of the time...
Most folks start with a LT sized Word document then try to manipulate it onto a COM10 envelope.
If using Word, I always tell my customers to use the Mailings tab for all envelopes and labels. ...
Not sure if it's in their database but try this site:
Lexmark Service Manuals (laserpros.com)
:)
You could also us Rule Based Printing in the print driver. Works great in a server environment. Just create and save your profiles and set specific programs to pull from specific trays:
61514
As...
Sounds like the group / sort setting in the print driver need to be changed.
Older version but here is a basic guide:
Setting printing options with Envisionware LPTONE public printing software
...
Agree, this is a known issue with Windows Photo Viewer. Open and print the pics in a different software OR put them on a USB and print from USB at the machine.
If USB works normally, its a software...
Oh man, as Neil Young once sang, "rust never sleeps".
With that level of corrosion, you are most likely beating a dead horse.
If the SYS board looks that bad, your clutches, solenoids, connectors...
Are you referring to Univeral Print connector from the Microsoft Download Center? If so, you need these OS:
Windows 10, Windows Server 2016, Windows Server 2019, Windows Server 2022
Windows 10 Pro...
SRAM is the 8 pin EERPOM chip on the SYS board. CMOS simply slides into the holder on the board.
The EEPROM is non-volatile, and values will not change if removed.
Not certain about the DDR# sticks...
This can be changed to 1% intervals by setting 08-8870 to a value of 0. Setting the value to 1 displays 10% intervals.
This change is made in 08 service mode, select classic mode, then enter 8870,...
Have you disabled the Marketplace app?
I have seen several issues with the op panels on iSeries when using the Marketplace app.
:)
You could also add a hammer, ya know, to work on Konica Minolta iSeries boxes.
:)