Search:

from the control/operation panel it is the speed of the copier with 00 after example a 1128 is a 28 cpm machine so it would be login 2800 password 2800.

from the remote user interface via a...

this has been an ongoing problem the first time i went out i checked the transfer belt assy to see if it was binding or hard to rotate but it was fine, so i ended up reseating the connectors on the...

For those that keep up with such things the J86 was caused by the feedshift gate shaft that was corroded at the bushing on the front side, so the feedshift solenoid couldnt move it. Thanks for the...

Thanks,

I saw the bulletin on kmaconnect but at nearly 250 bucks, and the only thing different was the metal gear and drive motor. I thought it would be cheaper going that route, but now I see the...

That may be what i need to do(which sux as i have just ordered 25 of the metal gears).
What i have replaced is the metal gear the drive motor and the two white plastic gears, that get there drive...

I have a couple of these machines at different schools, but i am having a similar problem with both of them. They go thru fuser drive gears faster than they should. One I have been on 4 different...

I have a customer with a couple of these things, and one of them has an E225 code. Im guessing it is the cis, since i havent seen it yet. Here is my question does anyone have an idea of what this...

I have two of these machines doing similar jams.

Machine number 1.
I am getting a J86 and a J63. it doesnt matter what tray is used but only does it when the paper is face down when it exits on...

Thanks Frits, but it didn't work that was one of the first things, that I tried

Thanks Jules,

Ok boys and girls I have gone round and round with this little guy, but finally we can get in and do what neede to be done.
I didn't do the Prescribe method simply because I...

I have one of these that the network password has been set and now they can't remember the login/password information. I have looked in the service manual but either I overlooked or any password...

This machine does not support SSL authenication, depending on the email server you may have to go the smb route

Hello,

Has anyone had to set one of these up on a windows 7 home edition computer. I need something to either scan to the computer or to email. We had a canon at the site, but it wouldn't work.

Thanks Blackcat.

the sensor was gummed up with grease, paper dust, and a long hair. Does Copystar Tech support not know of this. I have been round and round with them for this problem for about...

I have this 4050 that every now and then will start rotating the image 90 degrees out ie. from letter to letter R. I have seen this after I had a coworker fax me several and about 1/3 or so were...

We have a feeder issue with this machine it will pull the paper all the way to just past the scan glass, and will dog ear the rear side into the next set of rollers. We have replaced the feeder and...

Sorry looks like I posted in the wrong section. I have duplicate in connectivity

I have one that is printing out garbage. I have loaded the drivers on the pc's, and setup the TCIP. With the KM drivers we just get garbage, but with a Xerox driver we get the test print page then a...

I have one that is printing out garbage. I have loaded the drivers on the pc's, and setup the TCIP. With the KM drivers we just get garbage, but with a Xerox driver we get the test print page then a...